What have you done to your square lately??

Goldie Driver · Feb 21, 2020

78C10BigTen said:
So i rolled under to get a pic of my tank switch valve and i looked back to see this.... I QUIT!! IM DONE WITH GM REARS!!

You must be registered for see images attach

No biggie- you just left your Spy Hunter oil slick switch on.

All good.

Leaking pinion seal, I assume. Wonder what a chop would charge, or if that non crush sleeve deal is an option.

78C10BigTen · Feb 21, 2020

Goldie Driver said:
No biggie- you just left your Spy Hunter oil slick switch on.

All good.

Leaking pinion seal, I assume. Wonder what a chop would charge, or if that non crush sleeve deal is an option.

Im just pissed cus its a whole diff rear and the same damn problem.

gotyourgoat · Feb 21, 2020

Darth Plasma said:
Yeah that's a CUCV brush guard I got on craigslist a long time ago, and I just don't really like it on the truck, it makes it look lower. Plus the truck it came off at the junkyard was poorly painted and half of the air dam is covered in blue overspray

You don't like the brush guard or the air dam?
I've been wondering what mine would look like with that brush guard for a while now. Does it mount with the original bolts or did it require longer bolts?

bucket · Feb 21, 2020

78C10BigTen said:
Im just pissed cus its a whole diff rear and the same damn problem.

If it weren't for bad luck, you wouldn't have any luck at all.

78C10BigTen · Feb 21, 2020

bucket said:
If it weren't for bad luck, you wouldn't have any luck at all.

Thats my mothers favorite phrase! Been hearing it since i was a child

Poppy 87 · Feb 21, 2020

78C10BigTen said:
Im just pissed cus its a whole diff rear and the same damn problem.

No evidence of a leak prior to the install? That is truly bad luck, but you got a great deal on that limited slip differential right? Get the crush sleeve eliminator and a new seal. Still way ahead $$$ in the long run.

Sent from my XT1254 using Tapatalk

78C10BigTen · Feb 21, 2020

Poppy 87 said:
No evidence of a leak prior to the install? That is truly bad luck, but you got a great deal on that limited slip differential right? Get the crush sleeve eliminator and a new seal. Still way ahead $$$ in the long run.

Sent from my XT1254 using Tapatalk

Correct! No evidence prior unless the guy i bought it from cleaned it but it didnt look like it. Im gunna hafta google the sleeve eliminator. And i paid $250 for it, complete drum to drum.

TubeTruck · Feb 22, 2020

The 400 didn't make it. Taking the 350 out of the '75 till I can build the BBC

You must be registered for see images attach

82sbshortbed · Feb 22, 2020

Got the hoist today and ready to get BBC to the shop early next week.

When I lift it, would it hurt to hook on to one of the flywheel holes? Or no way.

You must be registered for see images attach

Poppy 87 · Feb 22, 2020

I would not use flywheel. Connect to block or cylinder head

Sent from my XT1254 using Tapatalk

Paladin · Feb 22, 2020

You must be registered for see images attach

Got the 350 torn down today. Everything looks scarily in great shape. All journals, bearings, and surfaces. Now for some much needed and deserved S&S (suds and smoke)! :cheers:

P.S. My Chinesium puller made the grade!

Paladin · Feb 22, 2020

Poppy 87 said:
I would not use flywheel. Connect to block or cylinder head

Sent from my XT1254 using Tapatalk

X2

Kevin Foust · Feb 22, 2020

Doing a little touch up on the floor.

You must be registered for see images attach

Goldie Driver · Feb 22, 2020

Got the tranny doc to do the 1 week checkup- all is well. :waytogo:

Have a little rough idle, so I changed some vacuum lines- mainly because tranny doc thinks that squeal I hear only while in reverse may be a vacuum leak.

Old tranny did it, too.

Also snugged the carb mounting bolts down a hair - just in case.

Anyone know of a vacuum circuit on a TH350C (besides the modulator) that is activated only in reverse?

:think:

I will change some more out tomorrow- can't hurt.

I also pulled number 8 - some deposits, but looks cleaner than it has in the past.

Maybe the EGR and EFE working are keeping the back 2 cleaner now.

Who knows.

legopnuematic · Feb 23, 2020

Bought these for my 79. Had been watching them on ebay for a while and the seller sent an offer for 50% off I jumped on it.

You must be registered for see images attach

What have you done to your square lately??

Goldie Driver

Full Access Member

78C10BigTen

Full Access Member

gotyourgoat

Full Access Member

bucket

Super Moderator

78C10BigTen

Full Access Member

Poppy 87

Full Access Member

78C10BigTen

Full Access Member

TubeTruck

I'm from Boston. Deal with it.

82sbshortbed

Fuckemall!!

Poppy 87

Full Access Member

Paladin

"Teufelshunde"

Paladin

"Teufelshunde"

Kevin Foust

Member

Goldie Driver

Full Access Member

legopnuematic

Licensed Junk Dealer

Similar threads

Latest posts

Forum statistics