-
-
legopnuematic reacted to ByrdDog's post in the thread About to get my first cummins truck. with
Like.
I'd install a fuel pressure gauge. The VP44 can still function on very low pressure, so you want to know if your lift pump is failing... -
legopnuematic replied to the thread NAPA Power Steering Pump?.The stud should just unthread. Saginaw pumps did not change much in the basic sense. I’d just take the pump apart and inspect the...
-
legopnuematic reacted to brooksman9's post in the thread What have you done to your square lately?? with Like.
Cleaned up to motor as best I could and brushed some red paint I had left from the first Camaro I did. Will need another coat but it...
-
legopnuematic reacted to 82sbshortbed's post in the thread What have you done to your square lately?? with Like.
Got the 6x9 4way Pyle in the 30 year old Sony speakers box. Sound way better. Just wanted to hear them before the cab corner boxes get...
-
It went to the ultra rare 5 tone scheme just before paint. lol
-
Before I stripped the 86, I took a ton of measurement pics of the trim. And then realized that the stripes and trim were nowhere near...
-
The upper location is established by the (multicolor) tape stripe. You'll want to get those and apply them before paint or reference...
-
legopnuematic reacted to Ken B's post in the thread What have you done to your square lately?? with Like.
Got the engine running yesterday. very pleased that it fired off so quickly. I have a new fuel system so was concerned about leaks ...
-
Usually Rock auto has a good selection with known brands but not this time. Just looked they have lars and BBB whoever they are and...
-
legopnuematic reacted to 78C10BigTen's post in the thread What have you done to your square lately?? with Like.
I woke it from its resting place. Havent done so in i bet 6 months. Threw in a battery with a jump pack, pumped the gas a bunch and shot...
-
legopnuematic replied to the thread About to get my first cummins truck..The 47RE is (like the VP44) not as bad as some people would like you to believe. The weak links on them are the factory torque convertor...
-
legopnuematic reacted to Jawzjeep's post in the thread About to get my first cummins truck. with Like.
@legopnuematic it's a slushbox. I've already been warned about using ether so I won't be doing that. Time to go read up on the VP 44...
-
legopnuematic reacted to Shorty81's post in the thread Anyone running an 8.1, what trans are you using? with Like.
I'm running a tried and true SM465 behind a old school 8.1
-
They sure do... for $$$
-
You asked for advice. You got advice. If you had your heart set on trading all along, you should have just did it and then posted up a...
-
-
Loading…
-
Loading…
