J
JBswth
Latest activity Postings About
-
-
JJBswth replied to the thread Can't decide what to do. Suggestions? Thoughts?.I would just stick with stock. There is nothing wrong with the Chevy 350. They are easy to rebuild, and you won't have to worry about...
-
JJBswth reacted to thedog52's post in the thread Can't decide what to do. Suggestions? Thoughts? with
Like.
Hello all. I have a 1991 Suburban 2500. It has the 350 TBI, and 4L80. It is 4X4. It is dead nuts reliable. I drove it to Florida lasy... -
JJBswth reacted to Ricko1966's post in the thread 700r4 TV cable cause acceleration/run away with 6.2? with Like.
I've had a diesel run away by sucking crankcase oil. It's not likely,but you should read up on it,and check your intake for engine oil...
-
JJBswth replied to the thread 3.08 Gears. What to Swap to?.I wouldn't go deeper than 3:73 with automatic. J. B.
-
JGet a tach,drive your truck,note your rpms at different speeds. Then look at an online gear ratio calculator,see how many rpms you will...
-
JFreeze plug/soft plug. Same thing. Softer than the engine block lol
-
JI've started my wore out carbed 350 in -50F and colder. I daily my square in ND all year round. Good battery and cables and proper choke...
-
JGood battery means adequate amperage to crank fast enough in a cold environment. Shouldn't be using heavy grade oil 10-30 or 10-40 ok...
-
JMost reliable and easiest to install are soft plug heaters. Directions will instruct which one to install it in. Remember GM installed...
-
JJBswth replied to the thread Tire size confusion..That is weird. Normally they will sell you anything you want. But then I remember when they would put an inner tube in a tubeless tire...
-
JJBswth replied to the thread What year box do I have?.Talking about using year correct trim on a different year tailgate. J. B.
-
JJBswth reacted to nvrenuf's post in the thread Big block running hot. Can’t figure out the issue with Like.
I still question the radiator size, that part number posted had a core thickness of 1-9/16” which is pretty thin. I run a factory 4 row...
-
JJBswth reacted to Shorty81's post in the thread Big block running hot. Can’t figure out the issue with Like.
My 496 is a 454 bored over .060 with a Skip White 496 rotating assy. 781 iron heads, headers. I added a extension to place the direct...
-
JJBswth replied to the thread Big block running hot. Can’t figure out the issue.Remote possibility, but if your new head gaskets are lacking some of the necessary water holes, that could be your problem. I bought...
-
JJBswth reacted to Ricko1966's post in the thread Big block running hot. Can’t figure out the issue with Like.
Is your serpentine belt supposed to be reverse rotation or standard rotation? Just cause it's serpentine doesn't mean it's reverse rotation.
-
-
Loading…
-
Loading…
Latest posts
-
-
-
Has anyone received door panels or sun visors from USA1 since March 2023?- Latest: TotalyHucked
-
-