8.1 vortec into 1979 k30

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Lu Blunt

Full Access Member
Joined
Jun 6, 2016
Posts
187
Reaction score
122
Location
Rye, CO
First Name
Luke
Truck Year
1979
Truck Model
K30
Engine Size
350ci
Recently found an 8.1 vortec for a good price. Wanting to swap it into my 1979 k30 with 350/sm465/np205. I’m still doing research and collecting parts. Id appreciate any recommendations for a shop in Colorado to help with the swap.
 

Attachments

  • CCF83807-9E8E-4F84-9D6B-5D0AC71D91B6.jpeg
    CCF83807-9E8E-4F84-9D6B-5D0AC71D91B6.jpeg
    211.6 KB · Views: 87
  • 5B51F18A-013D-40DD-932F-CB188C69688F.jpeg
    5B51F18A-013D-40DD-932F-CB188C69688F.jpeg
    256.3 KB · Views: 94

Vbb199

B-rate Hillbilly Customs
Joined
Jan 12, 2018
Posts
8,871
Reaction score
14,885
Location
Salisbury NC
First Name
Vince
Truck Year
89, 79
Truck Model
89 Suburban R1500, 79 C10
Engine Size
350, 502
You may need an adapter to mate the motor to the sm465. That right off comes to mind
 

Rickf

Full Access Member
Joined
Jul 29, 2017
Posts
463
Reaction score
546
Location
Grafton NH
First Name
Rick
Truck Year
1974, 1954 & a 1937
Truck Model
K20
Engine Size
350
Might not be able to use the a/c compressor (if needed) in that location.
 

Hunter79764

Full Access Member
Joined
Sep 1, 2021
Posts
223
Reaction score
296
Location
Grand Prairie, TX
First Name
Shawn
Truck Year
1987
Truck Model
Suburban V20
Engine Size
350
From memory, I think I've heard that the Medium Duty truck accessories are the best fitting in a swap application, but I'm no expert. I've got one in my Kodiak based motorhome if you have specific questions.
 

hoagster

Full Access Member
Joined
May 16, 2017
Posts
1,288
Reaction score
3,188
Location
California
First Name
Mike
Truck Year
1973, 2000
Truck Model
K10, 1500
Engine Size
5.3l
You may need an adapter to mate the motor to the sm465. That right off comes to mind
You are correct and Advanced Adapters has what he needs. I have a 5.3 LM7 connected to s SM465/205 combo. And The A/C location will not work. Easy fix with a upper adapter and a different belt. The A/C wiring will reach to the upper location without changing it.
 

Vbb199

B-rate Hillbilly Customs
Joined
Jan 12, 2018
Posts
8,871
Reaction score
14,885
Location
Salisbury NC
First Name
Vince
Truck Year
89, 79
Truck Model
89 Suburban R1500, 79 C10
Engine Size
350, 502
Unless you notch the frame ^

My buddy did a 5.3 swap with a 200r4 in his 85 c10.

He needed an adapter from advance adapters, and he notched his frame to clear the compressor

Personally I think that's very poor workmanship, but to each his own.
 

yevgenievich

Full Access Member
Joined
Mar 1, 2014
Posts
4,780
Reaction score
3,298
Location
Texas
First Name
Viktor
Truck Year
sad
Truck Model
very sad
Engine Size
less sad
Van accessories fit without notching
 

Lu Blunt

Full Access Member
Joined
Jun 6, 2016
Posts
187
Reaction score
122
Location
Rye, CO
First Name
Luke
Truck Year
1979
Truck Model
K30
Engine Size
350ci
As far as I know the 8.1 vortec uses the 502bbc block which is based on the 454 big block, not LS* based. 8.1L is 496ci and no LS based block can be bored and stroked to that large of a displacement. 8.1L uses normal sbc/bbc engine mounts and bellhousing bolt pattern

The 8.1L should mate to the SM465 no problem. Use an 8.1L manual flywheel and pilot bearing with my current clutch setup. Ive read you have to open the pressure plate mounting holes just a tad to allow for the larger metric pressure plate to flywheel bolts to pass through as well as remove the two dowel pins from the flywheel. The 8.1L also clears the ORD HD engine crossmember so that’s what I’ll be using.

My 79’ k30 is non-ac so no need to keep the ac compressor. Also read the stock 8.1L exhaust manifolds wont clear the frame but you can use any 454 manifold/headers

I’m still doing research and collecting parts
 

Dooley

Full Access Member
Joined
Mar 19, 2014
Posts
364
Reaction score
947
Location
North Coast
First Name
RW
Truck Year
1988
Truck Model
V30
Engine Size
454
You will need the big block bottom power steering pump bracket for the hydra boost pump also.
 
Last edited:

BearKing

Full Access Member
Joined
Apr 13, 2022
Posts
357
Reaction score
676
Location
Black Hills
First Name
Bear
Truck Year
1976
Truck Model
K10
Engine Size
400
As far as I know the 8.1 vortec uses the 502bbc block which is based on the 454 big block, not LS* based. 8.1L is 496ci and no LS based block can be bored and stroked to that large of a displacement. 8.1L uses normal sbc/bbc engine mounts and bellhousing bolt pattern

The 8.1L should mate to the SM465 no problem. Use an 8.1L manual flywheel and pilot bearing with my current clutch setup. Ive read you have to open the pressure plate mounting holes just a tad to allow for the larger metric pressure plate to flywheel bolts to pass through as well as remove the two dowel pins from the flywheel. The 8.1L also clears the ORD HD engine crossmember so that’s what I’ll be using.

My 79’ k30 is non-ac so no need to keep the ac compressor. Also read the stock 8.1L exhaust manifolds wont clear the frame but you can use any 454 manifold/headers

I’m still doing research and collecting parts
You have my attention. I so want to put one in my 1981 GMC K2500 HD.
 

fast 99

Full Access Member
Joined
Dec 31, 2021
Posts
1,589
Reaction score
2,150
Location
Spokane, Washington
First Name
Brian
Truck Year
81,85
Truck Model
K20
Engine Size
350
Kind of wondered about this conversion. I am from the old school more cubes the better era. Noticed at the local pick and pull no one was buying the 8.1L motors. Have seen 3 or 4 in the last year that got crushed. If I had the storage space would have bought them. Know there is a lot of interest in LS based engines, many of those are sold within a week.

Seems from the above comments using those motors isn't that difficult.
 

Bextreme04

Full Access Member
Joined
May 13, 2019
Posts
4,135
Reaction score
4,984
Location
Oregon
First Name
Eric
Truck Year
1980
Truck Model
K25
Engine Size
350-4bbl
The 8.1L is totally different than the Gen VI and older BBC engines. It shares almost nothing and you can't use standard BBC parts on it. Head bolt pattern is different, intake bolt patterns are different, crank is different. It IS NOT based on the Gen VI 502 block. It is a Gen VII BBC and you can basically only get performance parts from one or two different manufacturers, and they are VERY expensive. About the only things that will bolt directly on from old BBC engines are the exhaust and starter. It DOES have the standard chevy bellhousing pattern as well. If you are leaving it stock, that's not really a problem. But if you want to do any modifications you are basically stuck with Raylar engineering https://www.raylarengineering.com/. They have an entire section on engine swaps of the 8.1L into older cars. https://www.raylarengineering.com/vortec-8100-engine-swaps.html

It DOES NOT use the standard SBC/BBC engine mounts. They are basically LS style motor mounts and you will need an adapter to fit to older clamshell mounts. https://www.skspeed.com/dirty-dingo...otor-mounts-gm-8-1l-496-bbc-to-3-bolt-mounts/
 

yevgenievich

Full Access Member
Joined
Mar 1, 2014
Posts
4,780
Reaction score
3,298
Location
Texas
First Name
Viktor
Truck Year
sad
Truck Model
very sad
Engine Size
less sad
Interested notes on parts compatibility. With a specific gm crank, rods and pistons swap between gen 6 and 8.1l. Cams are also direct swap but different firing order
 

Forum statistics

Threads
41,852
Posts
903,521
Members
33,365
Latest member
rossivey
Top