Replacing a single frame rail, can it be done?

[nitrocharger]

Hello, new to the group but have had the same Squarebody for 30 years. I bought this truck in HS with my Dad and its been off the road for the past 25 years. I started a frame-off a year ago as one section of the frame had irreparable rust damage. I bought a new-to-me frame but I wanted to explore the possibility of swapping the good frame rail in the original frame with the donor frame rail. The benefit would be that it keeps the original VIN stamping and I get to keep a piece of my Dad and I. I understand its a lot of work drilling out rivets and replacing w Grade 8 hardware but is there any alignment that would be lost? Will the original holes line up? One truck was built in Baltimore ('76) the other in Flint ('75). Currently both frames are rolling chassis. I'd be interested in hearing from someone that has actually done or attempted to do this to get their perspective.

 

[Strick]

I've knocked the rivets out to remove the crossmember on dad's C20 Crew & have also moved the spring shackle that was riveted.
You  should be able to replace the one rail by doing just as you stated. It'll be more work but retaining the VIN plus the memory of "daddy's hands" will be worth it IMO.
Welcome to the site from steamy Central NC. Provide us with some pics of your project.

HS

 

[Edelbrock]

I would probably call a frame repair shop, and see what they have to say. What they would charge, why it would or wouldn't work, etc. If there are no frame repair shops in your area, then just call one in a different time zone. Call one that's in Hawaii. Doesn't matter where they are in the USA. After all, they specialize in frame repair. If anyone has the answers, its them. Just for good measure, I would call more than one shop.

 

[bucket]

I would probably call a frame repair shop, and see what they have to say. What they would charge, why it would or wouldn't work, etc. If there are no frame repair shops in your area, then just call one in a different time zone. Call one that's in Hawaii. Doesn't matter where they are in the USA. After all, they specialize in frame repair. If anyone has the answers, its them. Just for good measure, I would call more than one shop.

If you call any frame shop, they will either say to replace the whole frame, or say "get lost bud, we don't want to deal with your rusty truck."

Besides, there's people here that have done frame work and worked in frame shops. There's no need to call random businesses and bother them.

 

[bucket]

Yes, you can replace just the one rail. Time and money wise, it makes no sense, but for sentimental reasons, it kinda sorta makes sense.

If you are replacing ALL the rivets with bolts, make sure the frame stays square as you bolt it all together. I'd start at the front. Drill out all the holes from ~3/8" up to 7/16" and assemble with grade 8 hardware. Preferably bolts with flange heads and also pinch-loc flange nuts.