Search results

  1. N

    just so much to do

    Ok sorry to anyone following othe treads of mind had some computer tech problems and could not get online. This is the issues I'm having as of today 1. The steering column is in bad shape. The ignition works find with key and the gear shift is find. The turn signal is on the left sid but...
  2. N

    somethings missing

    Thanks this information will help a lot will update soon and also find out more about ESC harness
  3. N

    somethings missing

    ok I have a truck thats a part of two trucks the cab is from a 1981 with non auto windows and locks. The rest of the fram is from a 1987 with TBI the motor put in is from a 1995 chevy 1500 TBI now thats out the way this is what im writing about the 1995 motor has two sensor I can see from under...
  4. N

    Double gas tanks into one?

    I like the two tank idea the problem is the jack a I got the truck from cut everything from the driver side and has only the pass side running I would like to put this back together but i have no idea how everything links up in digram pics r step buy step installation
  5. N

    how to find and fix front end problem

    rebuild sounds like the way to go only thing im worried about is the upper ball joint on the control arm seems like most would just replace the hold control arm I want to just use the upper ball joint in the kit is it hard to get out and is there a trick I should use
  6. N

    how to find and fix front end problem

    Hi I'm using a smart phone making it hard to write in English. After having my truck sit up while I was on deployment , I started back driving it and notice a lot of shaking in the cab and steering wheel feels like its some thing going on with the front pass side tire its balling from the...
  7. N

    truck will not start

    I removed the starter and moved the wires from the exhaust connected the starter back up and she fired right up thsnks for the help I still would like to replace the wires soon where can I find the fusible link wire to replace it autzone don't have it
  8. N

    truck will not start

    Ok I think its the fuse link wires I want to replace it what's size wire and can it be replaced with one of the wires that has the fuse connections in between the wire
  9. N

    truck will not start

    hi friends I am using a computer so it can be better to understand. Last night I started the truck and drove in reverse out the parking space. Then I pull the head lights on and the truck died. The headlights did not come on and the interior lights did not come on when I open the door to get...
  10. N

    dash gauges not working

    left head Im working the same problem the most i can advise is that the factor water sensor is pluged into the same place as the aftermarket left head good luck i will pust more as i learn
  11. N

    how to get dash working

    My truck is a work of art. The cab is from an 1981 Chevy C-10. So that's how its listed with the DMV. But the front and back clip or from a 1986 Silverado and the motor is out of a 1995 Silverado. It had the late model 1986 350 5.7 TBI motor but it needed a ring job so I pulled it out and...
  12. N

    What should I do now !!!!!

    not burn up Good news the tranny is ok the connection for the lockup from the wire harness was not connected AAMCO was just trying to get more money first sign of burn tranny is burn fluid right my fluid is red why would they even come up with that it was burn up now I have a small new tranny...
  13. N

    What should I do now !!!!!

    God speed !!!!
  14. N

    What should I do now !!!!!

    I am an American US Army 11-b Iraq and Afghanistan veteran. I'm using my phone to post hear and it makes it very hard to write long messages. What I think I would do first is get the truck from that money greedy shop, because if its up to them total rebuild is the first and last why to fix this...
  15. N

    What should I do now !!!!!

    Ok hear I go again I got this truck 350 tbi 700r4 for cheap and was told the seals in the tranny was bad smh yeah right I being a new be in the old schools got it and had someone pull it and replace the seals and yep the tranny was in need of a rebuild I had it shipped to AAMCO and $1800 later I...
  16. N

    Pls help with altantator wiring

    Thks Thanks for the help I got a friend who knew a friend that works at the chevy dealership and got the help I was needed and for anyone that reads this in time don't be a idiot like me, just do what the guys above say and befor installation just swap the pullyset up but if ur of the same as I...
  17. N

    Pls help with altantator wiring

    100% right smh I'm just the idiot that sold the old motor at this point and got a new altantator so I gave up the old one smh lol yeah it's just to late to go back at this point can anyone help on moving forward with what I got
  18. N

    Pls help with altantator wiring

    Ok read careful for I was the only one to really see this madness happen ok I have a 1987 chevy c10 5.7 TBI that has to start a 1981 cab pretty basic no power windows or doors this motor needed a ring job I have no idea how to do so I pulled it and replaced with 5.7 TBI from a 1995 chevy 1500...

Latest posts

Forum statistics

Threads
42,160
Posts
910,378
Members
33,658
Latest member
87POPS
Top