Gatorhator98
Junior Member
- Joined
- Mar 17, 2018
- Posts
- 13
- Reaction score
- 2
- Location
- Minnesota
- First Name
- Mason
- Truck Year
- 1983
- Truck Model
- K10
- Engine Size
- 350
What are the thoughts on urethane under the windshield gasket? My bottom corners were leaking and the gasket was pretty dry and hard. When I pulled it it had urethane under the gasket. Obviously this blocked the drain holes in the corners. The inside radius of the pinch welds in the corners are sort of just starting to rust, not rot through. The edges are jagged after wire brushing the rust. With the new gasket alone would this seal up or should I use urethane to try and seal it better? I am torn on what to do because I feel like it might need extra help sealing but I don't want to block the drains and give the water more time to sit in the channel and work its way through and rot things out as well.