Search results

  1. R

    MS to prop valve help

    does it matter which way the lines from the master cylinder to the proportioning valve go I 'm customizing my lines and need a little help There is one line that is 1/4" the other 3/16 thanks roy
  2. R

    Hole Lotta Shakkin goin on

    on a 93 K2500 sub any input on what causes the front to dashboard to fell like its going to shake out the window replaced inner outer tie rods, front rotors pads calipers front hoses. could it be possible front anti-lock is going bad some times it kicks in when it (I feel shouldn't) I'm...
  3. R

    Please Help Got the shakes

    I have a 93 K2500 sub that I replaced the front rotors pads rear drums shoes bearings when I apply the brakes shakes very bad rotated tires same thing took drums and rotors back exchanged same problem new steering damper no change I have anti lock brakes and hydro boost any idea's I...
  4. R

    063 heads on tbi WHAT SAY YOU ??

    I have a set of 063 vortec heads that I'm considering to put on my 350 tbi rebuild I also have the gm. intake I was wondering if its worth it or shouldn't even bother. also is there any other things I have to do. thanks to all Roy
  5. R

    10 bolt front

    do they have a front excel posi ? like the posi rears have so when you apply gas the front tires grab where needed. with out doing that thumping you get when you cut the steering to tight on dry ground in 4 wheel drive ? Thanks Roy
  6. R

    hp freed up

    how much horse power can be freed up for a header swap?
  7. R

    10 bolt can't keep up

    I broke a 10 bolt for the second time on my burb, I was wondering if a 14 bolt would be better , only thing is I have 6 lugs another thing are the 14 bolt wider than 10 bolt any plus or minus would be appreciated thanks roy
  8. R

    upper rad hose

    I purchased a new radiator and the upper neck is a 1" 1/2 is that for a big block it's aluminum I was wondering if anyone has a part# for an 1 1/2 hose thanks roy
  9. R

    oem shorty headers

    anyone know where to get a set ? looking every where no luck. thanks, roy
  10. R

    horn issues

    any idea's on trouble shooting horn that's not working thanks roy
  11. R

    heater lever issues

    I replaced the heater core on the sub and found that on the (inside of the truck ) core cover there's the cable that goes from the cover to the a/c- heat levers Its broken in half this (do dad) I don't know what its called but its making air come out of all vents even when i just want...
  12. R

    body work

    Anyone out there know of any body shops or people familier with subs on or around LONG Island ny after 25 years with this sub the quarters are begining to show it. thanks roy
  13. R

    steering column

    The other day the spring load on my column shifter handle is flapping in the wind any idea's on how to fix this i have tilt steering. Thanks Roy
  14. R

    passenger rear window switch

    Hello again my rear passenger electric window switch brings window down but not up i was wondering if the driver door master switch might be defective i changed the switch on the rear door and it had the same problem when i jumped the green wire with the center thicker stud the window went...
  15. R

    back spacing and rear wheels

    I notice that the back wheels of my sub are narrower than the front would'nt it be possible to get the right off set to compensate ? lets say rather than a 4" back space on an oem wheel something like a 2" off set or no off set Has anyone ever figure it out?
  16. R

    window motor

    Hello after 25 years my rt front window motor refused to go down i hear clicking anyone know where to pick one up i should be thank full it didn't go bad on the down side thanks fellows roy
  17. R

    oil presure sending unit

    my oil presure gage does'nt work can i replace the original with one at a parts store this thing has sort of a cage around it i picked one up from e-bay but it has 2 poles up top where mine has only one thanks roy
  18. R

    idle's ok under heavy load break's up

    Hello I was wondering if anyone could help. I've been having the following issue when starting the truck idel's fine, when i take off to keep up with traffic no power breaks up i changed the cap rotor wires plugs when it warms up highway speed is ok but i wouldn't attemp to pass anyone...
  19. R

    front axcel question

    I have a 10 bolt stock front how those it work? I hear guys talking about posi front axcel's and stuff , when i turn the manuel hub locks doesn't both wheels lock becomming positive traction? also pulling the 4x4 lever in the truck don't tell me just one tire turns up front!! the other one...
  20. R

    a/c heat controls vacume ?

    when i slide the heater a/c controls to any position , wxample defrost or heat or a/c the air blows out of all the vents . I was told the hose leading to the vacume ball on the fire wall was off or defective i checked the hose looked fine. is ther something i overlooked thank you all roy
  21. R

    oil pressure gauge

    Hello again oil pressure gauge is not working, is the sending unit by oil filter? swap out see what happens
  22. R

    tranny with steroids

    Whats is the most powerfull tranny built for a sub stick/auto ?
  23. R

    73-87

    does anybody know way the classification is 73-87 sub i have an 88 and its the same square body as the 87 ? why not 73-88 sub
  24. R

    tailgate glass won't open

    Any idea's on why the tailgate glass won't open with the key, but does with the interior switch?
  25. R

    th 400 swap

    Hello i have a 700 r4 in my 87 burb 4x4 , and i was looking to replace it with a short tail th400 what would i need beside the transfer case to tranny adapter plate. Thanks for any help roy

Latest posts

Forum statistics

Threads
42,251
Posts
912,197
Members
33,754
Latest member
SquareInheretance
Top