mibars
Latest activity Postings About
-
-
mibars replied to the thread RETRO-Mod: Jeep intermediate steering shaft.I will need to do something similar. I was turning wheel hard with engine off and managed to make it loose again. In the one I got... -
mibars reacted to SquareRoot's post in the thread RETRO-Mod: Jeep intermediate steering shaft with
Like.
I drilled a 3/8 hole thru one side of the outer sleeve then welded a 5/16 nut over the hole. Assemble shafts and screw in a 5/16 x 1... -
mibars reacted to plugugly's post in the thread RETRO-Mod: Jeep intermediate steering shaft with Wow.
first pic is what my son sent me when it happened. The second pic is when it was pushed back into place as I prep to drill a hole...
-
Mine had a lot of slop in the steering Changed the power steering fluid and it made a world of difference. Hate to admit it but i have...
-
mibars replied to the thread Oil gauge issue.I've successfully used PTFE (aka Teflon) tape, not too much of it. Just verify with multimeter that there is less than 1 ohm between...
-
Well I suppose if I wasn't a dumb ass I might have figured it out, thanks for all the help guys. Looked at my shroud and you there's the...
-
The front ones are open because of the locking/auto/fixed hub. The rear ones are closed with the sticker on it.
-
mibars replied to the thread European 86 C20 454.Both look great and in my opinion better than what you have now. I don't know if in 2WD 3/4 ton Burb track width is different front and...
-
Pinstriping is being taken care of, and I have my licence plates :) I've also ordered a wooden/polished steering wheel, and next week...
-
mibars replied to the thread European 86 C20 454.It sounds sooo good!
-
mibars replied to the thread Power steering too slow?.I think you may be right. But that pressure switch got me thinking if maybe retrofitting it may be a solution. The functionality is...
-
Not that I'm aware of. I've had many of the NBS (99-07 classic) trucks and they do the same thing. Especially with bigger tires...
-
mibars replied to the thread Power steering too slow?.I get that pump spins slower, etc, but I've driven many cars with PS and never found a car where i'm able to spin the wheel faster than...
-
Totally normal. If you think about it, there's alot more friction/resistance the slower you go. So it makes sense the wheel is a little...
-
mibars replied to the thread Passing CA Smog help - High HCs.LOL, it's ridiculous, making the vehicle cleaner than it should be fails the "clean" check. But law is law heh...
-
-
Loading…
-
Loading…
