Trucksareforwork
Latest activity Postings About
-
-
Trucksareforwork replied to the thread Window motor.I did this one before I removed the vent window. The window was stuck closed because the actuator wasn’t working so there was no way I... -
Trucksareforwork reacted to SirRobyn0's post in the thread Correct timing and which vacuum port with
Like.
Completely agree with this. The problem, and it is hard to get some people to listed and believe this, but when the 305 was... -
Trucksareforwork reacted to Squirrely Brother's post in the thread Correct timing and which vacuum port with Like.
The best advice I received from the community was from @Ricko1966. He squared me away. Every engine is different. Mine likes 19 degrees...
-
Trucksareforwork replied to the thread Window motor.I swapped one out a few months ago. It honestly wasn’t that bad. It took a little jockeying to get the regulator untracked and...
-
Hey all, my name is Sam, I'm from Southern Indiana. My grandfather has had a 1989 Chevrolet Suburban since new, he got it to use on the...
-
Trucksareforwork replied to the thread Correct timing and which vacuum port.What motor do you have? If you have a 305 then 12 BTDC is likely way too much initial timing. You are likely to get pinging. Stock is...
-
Trucksareforwork replied to the thread ID this rocker step hole for me.Thanks. It came out pretty well given the problem and my chosen solution (welding a patch into it). I have the jambs painted but not...
-
-
Repair looks good to me...
-
Trucksareforwork replied to the thread ID this rocker step hole for me.Ok. I went back and looked at the listed truck and I'm thinking I'm on the wrong track. If it were rust proofing on MY truck, I would...
-
Trucksareforwork replied to the thread ID this rocker step hole for me.That would be ironic.
-
So I have been working on my 85 c10. One of the weird things about the truck is it is basically rust free on the cab and bed…EXCEPT it...
-
-
Trucksareforwork replied to the thread Some vent window lessons learned.smart. Both having the vids and having a big screen in the garage.
-
So I finally got to my vent windows. While I’m not going to post a thread on the finished product, or even post this like I’m an expert...
-
-
Trucksareforwork reacted to Matt69olds's post in the thread How a carbureted engine should start and run cold with Like.
Something else to consider on hot restart problems is the fuel return line on the fuel pump. Picture this: you’re sweating your ass...
-
Trucksareforwork replied to the thread How a carbureted engine should start and run cold.Thanks SirRobyn, I learned something there. Explains my truck's "roar" :)
-
-
Loading…
-
Loading…
