Front brake dust shields

[82Diesel]

Any companies out there reproducing these (title name) for 1/2 ton 4x4? I can only locate 2WD, which doesn't interchange. My Design and style, according to the parts catalog, is 1981-83 / 84 K1 (K10) only. The design changed again. Like the steering columns did.

You must be registered for see images attach

You must be registered for see images attach

 

[PrairieDrifter]

Any companies out there reproducing these (title name) for 1/2 ton 4x4? I can only locate 2WD, which doesn't interchange. My Design and style, according to the parts catalog, is 1981-83 / 84 K1 (K10) only. The design changed again. Like the steering columns did.

You must be registered for see images attach

You must be registered for see images attach

I've seen em available I do believe.

Search for a gm 10 bolt instead of by vehicle. There should be much that changed as far as I know. All the 80's trucks were 10 bolts and all had the same calipers. Maybe slightly different sized rotors, but wouldn't have made big difference, probably just between k10 k20

 

[82Diesel]

I've seen em available I do believe.

Search for a gm 10 bolt instead of by vehicle. There should be much that changed as far as I know. All the 80's trucks were 10 bolts and all had the same calipers. Maybe slightly different sized rotors, but wouldn't have made big difference, probably just between k10 k20

Good idea! I typically go by part # or as you said, vehicle. A friend of mine said they'd be the same as Dana 44?

 

[legopnuematic]

1977 was the introduction of the corp 10 bolt front, they ran concurrently with the Dana 44 front for a few years (1980). My understanding is the 77+ Dana 44s share all the same stuff knuckles out. So I’d imagine the dust shields would interchange 77+.

Not sure if 73-76 Dana 44 dust shields are the same or not as 77+

Check torque king 4x4 if you haven’t, they might have them.

 

[82Diesel]

1977 was the introduction of the corp 10 bolt front, they ran concurrently with the Dana 44 front for a few years (1980). My understanding is the 77+ Dana 44s share all the same stuff knuckles out. So I’d imagine the dust shields would interchange 77+.

Not sure if 73-76 Dana 44 dust shields are the same or not as 77+

Check torque king 4x4 if you haven’t, they might have them.

Good info! I know very little about the pre-79 trucks. Other than I NEED a C10 Olds diesel in my life... lol.
Anyways, thank you for the heads up on the company! I Found one guy on eBay who regularly has them but sell quickly.

 

[AuroraGirl]

1977 was the introduction of the corp 10 bolt front, they ran concurrently with the Dana 44 front for a few years (1980). My understanding is the 77+ Dana 44s share all the same stuff knuckles out. So I’d imagine the dust shields would interchange 77+.

Not sure if 73-76 Dana 44 dust shields are the same or not as 77+

Check torque king 4x4 if you haven’t, they might have them.

the only hiccup is 77-80 axle shafts and by extnesion the way the seal for the outer shaft and the c click get done, and then bearings in the hub , but the spindle and hub would be the same just taking different components

 

[saltdog]

Check this out-These are a direct replacement for GM part numbers 14023429 and 14023428. https://bjsoffroad.com/front-calipe...yGGs1VpYzPWiUOSbw3BmddgjPZTKHMjoCZKgWCPAp-OSV

 

[Sad Sack]

Any companies out there reproducing these (title name) for 1/2 ton 4x4? I can only locate 2WD, which doesn't interchange. My Design and style, according to the parts catalog, is 1981-83 / 84 K1 (K10) only. The design changed again. Like the steering columns did.

You must be registered for see images attach

You must be registered for see images attach

Try this: https://www.vividracing.com/solid-a...r-bracket-for-and-lug-rotors-p-152511794.html

 

[idahovette]

What year were the solid ones, no sheet metal dust shields?

 

[bucket]

What year were the solid ones, no sheet metal dust shields?

I'd like to know this as well. I'd guess pre-'81, when they went with thinner glass.

 

[hoagster]

My 73 Dana 44 has the solid ones

You must be registered for see images attach

You must be registered for see images attach

They cleaned up pretty good, I remember one of the members want to buy them from me!

 

[AuroraGirl]

My 73 Dana 44 has the solid ones

You must be registered for see images attach

You must be registered for see images attach

They cleaned up pretty good, I remember one of the members want to buy them from me!

77-80 k25 d44 for sure use em

 

[82Diesel]

What year were the solid ones, no sheet metal dust shields?

Definitely pre-81.

 

[82Diesel]

My 73 Dana 44 has the solid ones

You must be registered for see images attach

You must be registered for see images attach

They cleaned up pretty good, I remember one of the members want to buy them from me!

Yes. 4wd ones go for crazy money online... Especially SOLID! I've seen them up to $650...

 

[82Diesel]

Try this: https://www.vividracing.com/solid-a...r-bracket-for-and-lug-rotors-p-152511794.html

SWEET! Dana 44 is the same as the Front 1/2 ton axles right? I always forgot them. 12 or 10 bolt... hm.