-
-
Ssaltdog replied to the thread K20 Suburban Flaming River tilt column (also Wolff Engineering bearing).I was able to get everything hooked up and working, but the Flaming River canceling cam requires modification so the stock wheel and...
-
-
Ssaltdog replied to the thread K20 Suburban Flaming River tilt column (also Wolff Engineering bearing).@txaggie, you can install a borgeson u-joint shaft without doing anything else. In my case the upper shaft plastic shear pin separated...
-
Ssaltdog replied to the thread K20 Suburban Flaming River tilt column (also Wolff Engineering bearing).The upper rubber that covers the space to instrument panel is a bit loose, but the bottom seal fits great as did the OEM shifter linkage...
-
Ssaltdog replied to the thread K20 Suburban Flaming River tilt column (also Wolff Engineering bearing).Ordered a Flaming River column...
-
-
Ssaltdog replied to the thread K20 Suburban Flaming River tilt column (also Wolff Engineering bearing).@GMC_Nick it is and its great! But I'm about yank my column as the plastic keeper inside the lower internal shaft (part 41) is broken...
-
-
SInside GM Tilt Steering Column pdf- Link Page 43
-
Ssaltdog replied to the thread Replace seals on power steering gear box on truck or bench?.https://redheadsteeringgears.com/ they just work :)
-
Ssaltdog replied to the thread K20 Suburban Flaming River tilt column (also Wolff Engineering bearing).The Wolff bearing is awesome- way better than stock. Easy install, great instructions and super silky.
-
-
Ssaltdog replied to the thread Rag Joint removal faux pas.Here are the full parts book illustrations and part lists
-
-
Ssaltdog replied to the thread Rag Joint removal faux pas.@Frankenchevy cool, and it may never be an issue, but I looked up the parts book illustration and it sure looks like there are some...
-
-
Ssaltdog replied to the thread Rag Joint removal faux pas.@Frankenchevy, I just had the same issue. Are there plastic tabs inside the column than I now need to replace?
-
Ssaltdog replied to the thread Cowl area cleanout, are these fasteners the original correct ones FINISHED!!.Getting closer! https://newboyzsquarebodyrescue.com/products/81-91-rear-cowl-panel-metal-pin-and-u-clip-retainer
-
Ssaltdog replied to the thread Cowl area cleanout, are these fasteners the original correct ones FINISHED!!.Yeah- I need them too...I ran image search this AM and found nothing. You might be able to substitute these or something similar with a...
-
Ssaltdog reacted to pinballlarry1's post in the thread Cowl area cleanout, are these fasteners the original correct ones FINISHED!! with
Like.
Working on the '81 C10, removed the cowl between the hood and windshield. Pretty simple, even taking off the wiper arms went well... -
Ssaltdog posted the thread K20 Suburban Flaming River tilt column (also Wolff Engineering bearing) in Suspension, Steering & Brakes.Decided to swap out the Rag Joint with a Lares 200 (https://www.summitracing.com/parts/lsc-200), but when taking off the steering shaft...
-
-
-
Loading…
-
Loading…
