Warn Premium Manual Hubs

[85K10]

Hey guys I new to this 4X4 stuff so I need your help. I have an 85 K10 and want to put manual hubs in it. I found the warn premium ones (20990) for a great deal but the footnotes on the warn website say I may need the spindle nut conversion kit (32720). Can someone tell me if that is something I need for installation. It has factory axles just fyi. Thanks for the help guys this site has been wonderful help.

 

[bucket]

You will probably need the correct spindle nuts if you have the factory auto hubs currently.

 

[towman]

when i put the warns on mine didn't need the spindle nut kit, it is sticking in my ming the only time i needed that was on f150s

 

[GreaseDog]

i think bucket is right.

 

[Sasquatch]

when i put the warns on mine didn't need the spindle nut kit, it is sticking in my ming the only time i needed that was on f150s

Same here, I put them on my 87 suburban that had the auto hubs and they just bolted right on.

 

[85K10]

Yes I do have factory automatic hubs. Thanks for the help guys I will order it as well just to be safe.

 

[89Suburban]

Yes I do have factory manual hubs. Thanks for the help guys I will order it as well just to be safe.

You can always return it I guess if you don;t need it.

I got steel milemarker hubs for mine last year and they bolted right on. I had auto hubs. As a matter of fact, all the GM hubs I ever put locking hubs on just bolted right on, even on the full-time 4wd late 70's trucks. They were all half tons, don't know about 3/4 ton'rs....

 

[DesertBob]

I used the exact same hubs on my 85 k20 with autolocking hubs and the kit had everything I needed.

 

[WHEELMAN]

you can buy most of your parts on amazon.com...i would think there are cheaper..there is no shipping or tax.did not know if you knew about amazon..i have seen the hubs on there and other four wheel drive parts