AnimalMother
Junior Member
- Joined
- Sep 27, 2012
- Posts
- 16
- Reaction score
- 0
- Location
- Harrisburg,Pa
- First Name
- Kelly
- Truck Year
- 1984
- Truck Model
- K10
- Engine Size
- 350
So, going down the highway i came to a little hill and hit the go pedal a little harder... had some Jason Aldean blasting so i didnt hear it happen but i noticed no matter how hard i pushed... she just revved and didnt go faster. Its a 4spd auto with over drive and a shift kit. Don't ask if its a 400r or 350 trans i have no idea. It had a tow package in 84 so i ASSume 400r. I dropped it into drive, same thing. Dropped into 2nd and it was good. R is good. 1 is good. From a stop i put it back into Od and it runs through 1-2 then at high rpms at about 40mph it goes back into N.
We limped home and i hopped under her and a metal line running down the passenger side going into a bung fitting into the side of the tranny about half way up was dripping and the whole driveshaft and and Tcase was covered in T fluid. I'm hoping tightening the fitting and replenishing the T fluid will fix this all up, Please someone give me good news...
We limped home and i hopped under her and a metal line running down the passenger side going into a bung fitting into the side of the tranny about half way up was dripping and the whole driveshaft and and Tcase was covered in T fluid. I'm hoping tightening the fitting and replenishing the T fluid will fix this all up, Please someone give me good news...