Show me your lowered truck. The lower the better!

[Rustisbest]

Older pic but spindles, shackles, hangers and 2 leaves plus the overload pulled from the Big 10 leaf pack

You must be registered for see images attach

 

[TotalyHucked]

Right after I pushed it off the lift, rear coilovers are all the way down, front's not quite halfway up. Detroit Speed SpeedMax front/Quadralink rear setup. Wondering if I could actually drive it this low

You must be registered for see images attach

 

[Turbo4whl]

Wondering if I could actually drive it this low

You must be registered for see images attach

If you do drive it, put a set of wheels on the high manhole covers. They don't move much if you scrape the exhaust or suspension parts.

 

[89Suburban]

You must be registered for see images attach

 

[bucket]

You must be registered for see images attach

Recent modifications or AI? Lol

 

[89Suburban]

AI?

Shhh just look at it.

 

[xm20k]

Since putting stock coils back in the front because it was too low. I think the CCP tubular arms need some positive camber pulled out since it's not sitting as low. The fronts sit a bit \ / Like it's starting to lift the front. It drives fine doesn't pull or wander but on a sharp turn it will squeal the front tires in a turn part of that could be the skinnies and the spool. Noticed it this week as I've been driving it every day to get that last 125 miles on the rearend break in.

You must be registered for see images attach

There are a bunch of shims front and rear on both sides, so I think I'll pull one off each corner and see how that goes.