More gear pattern pic. This time it’s for my rear set
- Thread starter sqhead
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
AuroraGirl
Full Access Member
- Joined
- Sep 8, 2019
- Posts
- 9,218
- Reaction score
- 6,199
- Location
- Northern Wisconsin
- First Name
- Taylor
- Truck Year
- 1978, 1980
- Truck Model
- K10, K25
- Engine Size
- 400(?), 350
ius the yellow being wiped away on the "top" of the gear meshing interface too much or did you not directly wipe it on the top oonly on the faces? I guess I dont know how close that stuff is when its meshed
- Joined
- Oct 30, 2019
- Posts
- 2,884
- Reaction score
- 6,485
- Location
- Downingtown, PA
- First Name
- Wayne
- Truck Year
- 1974
- Truck Model
- Jimmy
- Engine Size
- 350
Remember, this is the drive side:
The drive side, most important, coast side, not so much. The pinion could be a little deeper, because the pattern runs off the edge.
Are these used gears? The pattern is good, run it!
You must be registered for see images attach
The drive side, most important, coast side, not so much. The pinion could be a little deeper, because the pattern runs off the edge.
Are these used gears? The pattern is good, run it!
