mrbrown88
Junior Member
- Joined
- Mar 15, 2016
- Posts
- 3
- Reaction score
- 0
- Location
- St. Louis
- First Name
- Matt
- Truck Year
- 1986
- Truck Model
- K10
- Engine Size
- 305 for right now
I have an 86 K10 with a tired 305 (never liked the 305 to begin with to be honest). I'm looking to buy a 350 crate motor and build it to make 300-350 HP. I'm looking to spend less than $3,000 if possible, but may go up depending on what I need to make a good motor. What is a good recipe for this? I'd like to know cams, heads, carb, intake, headers, etc., everything I will need for a runner. If I can carry over some parts from the 305 I would be okay with that as well. Thanks in advance for everyone's help. I know some of this has been covered in other threads, but could never find exactly what I was looking for.
Also, I'd like to use the stock 700R4 (if it will handle that power), but it will most likely need a rebuild. Have you guys used Monster Transmission for rebuild kits and if so how is the quality?
Also, I'd like to use the stock 700R4 (if it will handle that power), but it will most likely need a rebuild. Have you guys used Monster Transmission for rebuild kits and if so how is the quality?