RedGeneral
Member
- Joined
- Apr 2, 2020
- Posts
- 44
- Reaction score
- 24
- Location
- PA
- First Name
- Eric
- Truck Year
- 1987
- Truck Model
- R10 Custom Deluxe
- Engine Size
- 350
Ok let's get right to it, I have a 1987 Chevy R10 Custom Deluxe 8' bed that I'm restoring, pulled the original 4.3l v6 (128,000) miles out and replacing with a 87 350 block,
used SUM-SBCKIT3-300 rebuild kit, Installed
COMP Cams Thumpr Hydraulic Flat Tappet Cam and Lifter Kits K12-600-4, this is where I stopped.
I was going to install aluminum heads, but since this is a tight budget Build I decided to go with vortec heads to keep the cost down. Started looking into these heads..
Summit Racing® Vortec Cylinder Heads SUM-151124
I intend on using the FI tech fuel system.
So I'm looking for suggestions for either an intake or heads/intake combo.
This is going to be fun day/Sunday drive truck.
Any help would be greatly appreciated!
used SUM-SBCKIT3-300 rebuild kit, Installed
COMP Cams Thumpr Hydraulic Flat Tappet Cam and Lifter Kits K12-600-4, this is where I stopped.
I was going to install aluminum heads, but since this is a tight budget Build I decided to go with vortec heads to keep the cost down. Started looking into these heads..
Summit Racing® Vortec Cylinder Heads SUM-151124
I intend on using the FI tech fuel system.
So I'm looking for suggestions for either an intake or heads/intake combo.
This is going to be fun day/Sunday drive truck.
Any help would be greatly appreciated!