-
-
NNick88 replied to the thread New engine troubles. Need help..That's been my thinking, the rings because of the smoke from breathers. I will definitely do that with a vacuum gauge on dipstick see...
-
NNick88 replied to the thread New engine troubles. Need help..Intake gaskets were a bit large but before I swapped cams I had smaller ones that fit perfect that had the same smoke, albeit with a...
-
NNick88 replied to the thread New engine troubles. Need help..It has an exhaust on it brand new stainless but it came out much louder than id like, im gonna add on some small resonators to try to...
-
NNick88 replied to the thread New engine troubles. Need help..I was originally running it for a while to tune it, ran it for a while tuning a quadrajet that ended up being junk then I switched to...
-
NNick88 replied to the thread New engine troubles. Need help..Original oil i used for break in smelled a bit like gas, which i figured since I tuned the carb with that oil, I since changed it to...
-
NNick88 replied to the thread New engine troubles. Need help..I put the rings on, made sure they were all oriented correctly and I made sure they were all clocked correctly. Intake gasket is a bit...
-
NNick88 replied to the thread New engine troubles. Need help..Just some more info: the rings are plasmamoly rings, on hypereutectic pistons. The guy who honed it is a machinist that has been...
-
NHey guys, I just recently rebuilt the LT9 350 in my GMC. It is now a 383 stroker with flotek heads, eagle rotating assembly, howard...
-
NHey yall, I'm rebuilding a 1986 4x4 HD case th400 to hold power. Upon pulling apart the front pump I found there was some scoring where...
-
NNick88 replied to the thread Uneven rear main seal, help needed..Ok I see what your saying now. I used a different seal before that I screwed up so I put in this one instead but the other one had the...
-
NNick88 replied to the thread Uneven rear main seal, help needed..I don't really understand what your saying to be honest.
-
NHey guys I'm building a 383 stroker out of an 86 350 1 piece rear main block. The issue is I got the seal on but even when I spin the...
-
-
NWe like pictures doesn't have to be all finished!
-
NNick88 replied to the thread Modified engine crewcab gas mileage?.I should've also clarified also, this truck will be my "daily driver" but I hardly drive the blazer anymore nor will I drive this much...
-
NNick88 replied to the thread Modified engine crewcab gas mileage?.Yeah I should have clarified haha. I just kept calling it lockup because it acts similarly
-
-
Loading…
-
Loading…
