Discussion in 'Engine & Performance' started by Mark Vucelick, Feb 24, 2020.
First fire of my 489 stroker. Roller camshaft, AFR heads.
Very nice! Now for the burnout video
Sounds very nice.
What all is in it?
Scat stroker crank/rods/pistons
Strab tech hydraulic roller cam
Smith brothers pushrods
Roller rockers (cant remember the brand)
Melling stock style oil pump.
ARP main bolts
Nice! Sounds awsome. What the cam specs?
109 Lobe Sep
Sounds nice and responsive!
nice setup, i had a 496 with the AFR 305s. the cam was around .650 lift and the motor was about 10.5:1 and ran a 1050 dominator on it. It was a great setup and made about 550hp and about 650tq at the tires. never ran hot, and never any issues with it. they make great tq you will have a ton of fun with that motor.
The last couple of these i saw dynoed made between 660 and 730 at the flywheel. I was not going to re-invent the wheel. The performer rpm ones made 660 and the victor jr ones made 730.
ya that would be about right for at the flywheel.
Man, that sounds amazing!
Separate names with a comma.