Search results

  1. Bagged Dually

    Good factory oil cooler KC4?

    Double post
  2. Bagged Dually

    Good factory oil cooler KC4?

    Not sure exactly what truck your is out of but I have one that came out my 87 GMC dually. Mine was replaced when a new big block was installed and it only got about 25k miles put on it before I bought the truck and tore it all out and went for a complete build with a cummins. So I have a like...
  3. Bagged Dually

    Strange york 209 compressor

    I thought the yorks were aluminum and I think that's actually the same article I learned that from. I have actually never come across a Tecumseh to date. All of the ones I've had have all been yorks. I guess I've just kinda learned what vehicles had them. They went on a lot of vehicles but not a...
  4. Bagged Dually

    Strange york 209 compressor

    From what I've read York and Tecumseh both made basically the same AC compressor. The main difference being the yorks were aluminum case and the Tecumseh version used a cast iron casing. This one being aluminum I'm assuming is a York. It was pulled off of a early 60's mercedes. That's all I...
  5. Bagged Dually

    Strange york 209 compressor

    Sorry if this doesn't belong here but we use yorks for an air source for air ride so lowered suspension seemed like a good catagory for this. So I recently acquired a York and after inspecting the crank shaft it's for sure a 209. It pumps well and would make a great EDC I'm sure BUT...this...
  6. Bagged Dually

    Steering wheel fitment

    All of the junk yards in my area only want to sell the wheel with the air bag. Also it seems like the 1995+ steering wheels are made of a softer foam than the older models and any used ones I find have huge chunks missing out of the outer ring or their just falling apart from sitting in a junk...
  7. Bagged Dually

    Steering wheel fitment

    The truck in question is actually my daily driver. It's a 1995 gmc 1500 shortbed. 1995 is the first year of the newer style interior and is equipped with an air bag. My problem is that the brackets holding the air bag into the wheel itself are broken and let's the air bag just about fall out of...
  8. Bagged Dually

    2007 5.9 24V Cummins into a 87' C30 Square

    Sick build man. What are those seats out of?? I want a set of those for my crew cab.
  9. Bagged Dually

    Cab mount location

    While I was doing my frame work and had my cab off the chassis I took all of my body mount bushings and threw them in a box. Now I'm going to put them back in and wondering if they go in a certain place. Some of them look thicker than others. Is that just because some are more worn than others...
  10. Bagged Dually

    Catastrophic roller lifter failure

    Nope. Not that I can see. So far everything but the cam and lifter appear to be in great shape. This goofy thing was even still running just like normal when we started on it. It was just making a ticking like a bad lifter tick lol.
  11. Bagged Dually

    Catastrophic roller lifter failure

    I'll post a pic of the cam when ever we get around to getting it taken out. It's the first cam I've ever seen with a dent in the love. I didn't even think that was possible.
  12. Bagged Dually

    Catastrophic roller lifter failure

    I think it's a 2004. The cam is smoked also. I looked down through the lifter bore and that lobe looks like it went threw a wood chipper. Pretty sure the engine is goin to have to come out on this one. I've not tore apart an LS series engine beyond the heads but I think the oil pump has to come...
  13. Bagged Dually

    Catastrophic roller lifter failure

    Yep it's 100% stock. It's my sister in laws truck so I'd say it doesn't get beat on to much either. It was still running really well when we pulled it apart also. Just making a slight knocking noise from the valve train. I know something was wrong when we had to use a slide hammer welded to a...
  14. Bagged Dually

    Catastrophic roller lifter failure

    I pulled a bad lifter out of my little brother Tahoe last night with a 5.3L in it. We had to pull the heads to even get at the lifter. What a job that was. The bad lifter didn't want to come out and I couldn't figure out why. Little did I know what we were about to find. This thing started...
  15. Bagged Dually

    Wtf is going on with my brake lights??

    I tried it with no luck but I think your onto something with the hazard button. I pushed it in today and it didn't feel right. I don't really know how to describe it but it almost felt really gritty or something. I read that a lot of the blazers actual got recalled for the multi switch. I'm...
  16. Bagged Dually

    Wtf is going on with my brake lights??

    Well I think I've about got it narrowed down to the multi switch. I've checked all of the harnesses and wiring now and all looks well and ohms readings are fine. I'm just gonna have to buy that high priced switch and hope it works. Someone on another forum said you can get a cheap one on fleabay...
  17. Bagged Dually

    Wtf is going on with my brake lights??

    The turn signals on the back are red. It's a completely red housing except the back up light. The way I understand the third brake light on my truck is that it has it's own wire from the steering column. The line splits off into 4 seperate 12 volt brake wires. Third brake, rear lights, cruise...
  18. Bagged Dually

    Wtf is going on with my brake lights??

    My bad. I forgot to mention that I've already replaced all the bulbs, the circuit boards inside the tail lights, and all the fuses and relays. I even tried jumping the 12 volts across the relay and I still can't get them to light up. I tested the connection at the light and I'm not getting any...
  19. Bagged Dually

    Wtf is going on with my brake lights??

    I'm working on my daily drive right now not my square but you guys are some of the most knowledgable I know so I figured I run this by you all. The truck is a 1995 GMC 1500 2wd SCSB 350 and a nv3500. I was driving to school a few days ago when someone pulled up next to me and told me my brake...
  20. Bagged Dually

    Clutch not fully engaging

    I'm supposed to go get the truck about 3 hours away in a few days. Probably 90% of the trip is on the interstate but I might try to trailer it anyway. I just put the clutch in it and really don't want to have to do it again. Thanks for all this good advice and info guys. Id be lost without it.
  21. Bagged Dually

    Clutch not fully engaging

    The bell housing isn't removal able so it must be a 3500. Synchromesh is what I put in it. I remember it was a pain in the ass to find and all I could find was penzoil. I'll try all of this stuff and we what happens. Thanks for all the great info guys.
  22. Bagged Dually

    Clutch not fully engaging

    I'll check it as soon as I get the truck back. I don't get the truck back for a few more days. It had the issue before I sold it and they never fixed it. They just parked it and started doing the body work on it. I filled the trans at one point and I remember it took some kind of weird fluid...
  23. Bagged Dually

    Clutch not fully engaging

    I honestly don't know shit about hydraulic clutches lol. If you want a complete custom air ride setup or a motor built I'm your guy but not hydraulic clutches. I've just never had to mess with one till now. The best way I can explain it is for example if your at a stop light and have the truck...
  24. Bagged Dually

    Clutch not fully engaging

    Well I'm about to get a truck back that I had sold some family members. It's a 1995 gmc 1500 2wd short bed( I know it's not a square but hopefully you guys can still help). I put a new TBI 350 in it and it's a factory 5 speed truck. I'm guessing it has a NV4500 but I'm really not sure on what...
  25. Bagged Dually

    new engine for the CC Dually

    I did know about the Chevy trans behind the cummins. I'm trying to do this as cheaply as possible though. So I'm going to try and just find an entire dodge truck and use everything that's already there instead of having to buy all kinds of over priced adapters and parts and pieces.

Latest posts

Forum statistics

Threads
41,847
Posts
903,379
Members
33,361
Latest member
iiixtremeiii
Top