Tire size for 12 inch lift on 1985 suburban?

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

short

Junior Member
Joined
Oct 1, 2021
Posts
27
Reaction score
5
Location
close by
First Name
eric
Truck Year
1985
Truck Model
suburban k10
Engine Size
350
I have no idea what you're planning to do with this truck and I probably shouldn't know for my own best interest so please don't get specific if it's something crazy lol, but I can understand the need for that type of **** sometimes seems necessary, can't say I've never built a truck with apocalypse in mind. Hell, a 4x4 square Suburban on 40s fits that bill pretty well.

I'd say impacts to the body/frame shouldn't do a ton of damage to your axles themselves. If they're REALLY hard hits and the truck is lifted super high there's a chance you could rip your axles out from under you, but that would happen with a 3/4 or 1 ton as well. Definitely don't use blocks, make sure they're beefy springs. As far as blowing up gears and axle shafts, as long as you're not dumping the clutch to build speed while attempting to "bump" stuff or smoking the tires with your foot to the floor once you've made contact and came to a stop, I don't imagine the axles will be too stressed. Heavy rocking forward and back to try to get un-stuck might cause issues. Plainly put, they're weak axles, the gears specifically. But as long as there's no extreme torque demands from them they shouldn't just explode.

Good luck with your upcoming demo derby/rampage/romp in the post apocalyptic landscape. Hope it all works out for you lol

Post up some pics once you got this beast sitting on 40s, could be cool
Thanks for the info. I definitely will post some when I have a proper look for the truck. Also that bumper cars comment was just me "hypothetically" speaking hahaha..........
 

short

Junior Member
Joined
Oct 1, 2021
Posts
27
Reaction score
5
Location
close by
First Name
eric
Truck Year
1985
Truck Model
suburban k10
Engine Size
350
Looks like 40's, but doesn't look like 12 inch lift. Really hard to tell, but you can kinda see the arch on the RF spring. My guess is 8". It also looks like the fenders are cut.
Thanks for the help bucket. I have these photos as well. He said the size of tires in the photo that's not filtered in 37 if that's any help. Obviously we can only estimate with photos but I didn't think it had a 12in lift either
 

Attachments

  • Screenshot_20211123-220835~2.png
    Screenshot_20211123-220835~2.png
    1.8 MB · Views: 67
  • Screenshot_20211123-221004~2.png
    Screenshot_20211123-221004~2.png
    1.1 MB · Views: 74

AuroraGirl

Full Access Member
Joined
Sep 8, 2019
Posts
9,121
Reaction score
6,038
Location
Northern Wisconsin
First Name
Taylor
Truck Year
1978, 1980
Truck Model
K10, K25
Engine Size
400(?), 350
I have no idea what you're planning to do with this truck and I probably shouldn't know for my own best interest so please don't get specific if it's something crazy lol, but I can understand the need for that type of **** sometimes seems necessary, can't say I've never built a truck with apocalypse in mind. Hell, a 4x4 square Suburban on 40s fits that bill pretty well.

I'd say impacts to the body/frame shouldn't do a ton of damage to your axles themselves. If they're REALLY hard hits and the truck is lifted super high there's a chance you could rip your axles out from under you, but that would happen with a 3/4 or 1 ton as well. Definitely don't use blocks, make sure they're beefy springs. As far as blowing up gears and axle shafts, as long as you're not dumping the clutch to build speed while attempting to "bump" stuff or smoking the tires with your foot to the floor once you've made contact and came to a stop, I don't imagine the axles will be too stressed. Heavy rocking forward and back to try to get un-stuck might cause issues. Plainly put, they're weak axles, the gears specifically. But as long as there's no extreme torque demands from them they shouldn't just explode.

Good luck with your upcoming demo derby/rampage/romp in the post apocalyptic landscape. Hope it all works out for you lol

Post up some pics once you got this beast sitting on 40s, could be cool
youre saying you cant do a mad clutch kick while Racing around on pavement in a square? With huge tires and lots of power put down. Aww
 

dvdswan

Full Access Member
Joined
Mar 11, 2014
Posts
2,366
Reaction score
2,024
Location
Port Orchard, WA
First Name
Dave
Truck Year
1978
Truck Model
K10
Engine Size
350
You will definitely want to upgrade the axles and more importantly the brakes.

The rolling mass that is created by a 44" tire and 12" lift, you will need a greater stopping distance.
 

bucket

Super Moderator
Staff member
Super Moderator
Joined
Aug 3, 2010
Posts
28,956
Reaction score
23,466
Location
Usually not in Ohio
First Name
Andy
Truck Year
'77, '78, '79, '84, '88
Truck Model
K5 thru K30
Engine Size
350-454
Thanks for the help bucket. I have these photos as well. He said the size of tires in the photo that's not filtered in 37 if that's any help. Obviously we can only estimate with photos but I didn't think it had a 12in lift either

Yep, that really looks like maybe 8" springs. Those are cutout flares too, which you have to remove a fair amount of metal to install them. That explains why the wheel wells look like they do in the other photos.
 

bucket

Super Moderator
Staff member
Super Moderator
Joined
Aug 3, 2010
Posts
28,956
Reaction score
23,466
Location
Usually not in Ohio
First Name
Andy
Truck Year
'77, '78, '79, '84, '88
Truck Model
K5 thru K30
Engine Size
350-454
You will definitely want to upgrade the axles and more importantly the brakes.

The rolling mass that is created by a 44" tire and 12" lift, you will need a greater stopping distance.

Yep, brakes are very important! Even with cautious driving, all it takes is just one doofus to pull out in front of you and then you are playing bumper cars whether you want to or not.
 

bucket

Super Moderator
Staff member
Super Moderator
Joined
Aug 3, 2010
Posts
28,956
Reaction score
23,466
Location
Usually not in Ohio
First Name
Andy
Truck Year
'77, '78, '79, '84, '88
Truck Model
K5 thru K30
Engine Size
350-454
That actually may only be a 6" lift. It doesn't look all that much higher than mine with 36x15.5's on it. Mine has 4" front springs and about 5" over stock in the rear.

You must be registered for see images attach


Certainly no 12" lift at all.
 

Vbb199

B-rate Hillbilly Customs
Joined
Jan 12, 2018
Posts
8,871
Reaction score
14,885
Location
Salisbury NC
First Name
Vince
Truck Year
89, 79
Truck Model
89 Suburban R1500, 79 C10
Engine Size
350, 502
I wish I still had a spare 10 bolt front axle shaft and a 10 bolt rear axle shaft laying around so I could show you the disproportion of one of them next to a 40" tire. Its a twig compared to a 40"


But in the meantime, you're in luck.. I'm servicing my Dana 60 front axle on my trail truck,, so enjoy a picture of what a 1 ton axle shaft looks like next a 1/2 ton shaft, (old pic) and then what a 1 ton axle shaft looks like laying inside of a 39.5x18x16 tire, and maybe think about if you really want to strain that 10 bolt like that. Hell even the 60 looks like it could break with enough traction and power.
 

Attachments

  • 20200229_182814.jpg
    20200229_182814.jpg
    100.8 KB · Views: 72
  • 20211124_140537.jpg
    20211124_140537.jpg
    110.4 KB · Views: 98

short

Junior Member
Joined
Oct 1, 2021
Posts
27
Reaction score
5
Location
close by
First Name
eric
Truck Year
1985
Truck Model
suburban k10
Engine Size
350
Thank you guys for the feedback. So what would be the best option if I'm on a budget? Here's some photos of what I want my truck to look like. The owner told me the tires were 40s in most of the photos and 37 in the unfiltered photo that has cut out flares. I'm not sure about the tire size in the filtered photo. Bucket estimated that it has around a 6in lift. Bucket also noticed the fenders were cut to accommodate the flares/bigger tires. If any one has any experience with fenders, would you be able to give me an estimate on how much was cut above the wheel? Thanks again
 

Attachments

  • Screenshot_20211122-204931~2.png
    Screenshot_20211122-204931~2.png
    1.5 MB · Views: 82
  • 98323371_934124087011969_4199535828512276480_n.jpg
    98323371_934124087011969_4199535828512276480_n.jpg
    35.5 KB · Views: 80
  • 118158444_1003184213439289_8395698772733020866_n.jpg
    118158444_1003184213439289_8395698772733020866_n.jpg
    70.8 KB · Views: 76
  • Screenshot_20211123-221004~2.png
    Screenshot_20211123-221004~2.png
    1.1 MB · Views: 72
  • Screenshot_20211123-220835~2.png
    Screenshot_20211123-220835~2.png
    1.8 MB · Views: 71

short

Junior Member
Joined
Oct 1, 2021
Posts
27
Reaction score
5
Location
close by
First Name
eric
Truck Year
1985
Truck Model
suburban k10
Engine Size
350
One more
 

Attachments

  • 86694941_864311740659871_8274946290421334016_n.jpg
    86694941_864311740659871_8274946290421334016_n.jpg
    124.1 KB · Views: 65

short

Junior Member
Joined
Oct 1, 2021
Posts
27
Reaction score
5
Location
close by
First Name
eric
Truck Year
1985
Truck Model
suburban k10
Engine Size
350
That actually may only be a 6" lift. It doesn't look all that much higher than mine with 36x15.5's on it. Mine has 4" front springs and about 5" over stock in the rear.

You must be registered for see images attach


Certainly no 12" lift at all.
Thanks for the help. The flares look pretty similar to yours. Could you give me an estimate on how much metal is cut out above the wheel? I just asked this on my other thread not realizing I could've just asked you
 

Vbb199

B-rate Hillbilly Customs
Joined
Jan 12, 2018
Posts
8,871
Reaction score
14,885
Location
Salisbury NC
First Name
Vince
Truck Year
89, 79
Truck Model
89 Suburban R1500, 79 C10
Engine Size
350, 502
Thank you guys for the feedback. So what would be the best option if I'm on a budget? Here's some photos of what I want my truck to look like. The owner told me the tires were 40s in most of the photos and 37 in the unfiltered photo that has cut out flares. I'm not sure about the tire size in the filtered photo. Bucket estimated that it has around a 6in lift. Bucket also noticed the fenders were cut to accommodate the flares/bigger tires. If any one has any experience with fenders, would you be able to give me an estimate on how much was cut above the wheel? Thanks again
So, the biggest issue with these trucks is, there's usually plenty of vertical fender space, but never enough horizontal fender space.

What some people usually do is just trim the corners of the fenders off + lift to accommodate larger tires. You eventually just get to a point where you have to lift the entire tire out of the fenderwell and put the truck above the tire once it's a big enough tire. LOL

I'd say if those really are 40's, it's probably a 6" lift based off how much of the tires fit into the fenderwelll.

I would (personally) stop at that 6" because you'll start having to get into custom driveshafts if it keeps getting lifted, and then eventually you'll wanna consider crossover steering because the factory steer will begin to suck and making left turns becomes difficult past that.
Imo, that 6" lift is kinda the maximum lift on a budget for minimal work.. past that 6" things become expensive if you wanna do it up decently and still have 4x4.

For budget purposes, I'd say just get your 8 lugger 3/4 ton set, or at least put a 14b ff rear end in, and skip the stage if a sf 14b. Those tires scare me on a semi floater... I've lost axle c clips due to larger tires on semi floaters....

The 3/4 ton 8 lug axle is just hubs, brakes, spindles, the axle tube, gears, and axle shafts are the same as a 1/2 ton 10 bolt.
you'd definitely as aforementioned want plenty of stopping power. You may even consider tossing the 1/2 ton Master cylinder and replacing it for a 3/4 ton master cylinder as well to assist in stopping the rig.

I meant to say by the way, I hope you didn't take my post as me being ****** with you when I said "maybe think about if you really want to strain that 10 bolt like that. "

I meant no malice in it
 

bucket

Super Moderator
Staff member
Super Moderator
Joined
Aug 3, 2010
Posts
28,956
Reaction score
23,466
Location
Usually not in Ohio
First Name
Andy
Truck Year
'77, '78, '79, '84, '88
Truck Model
K5 thru K30
Engine Size
350-454
What's the definition of "on a budget" in this case? Buying new or used parts, or a combo of both? What's the specific look you are going after? The pictures of that brown Burb show two completely different looks, imho.

I think the way I did mine makes the truck look bigger and meatier than it actually is, but it really wasn't budget friendly I guess. The 12" wide wheels were fairly cheap, but the wide tires were not. The cutout flares also were not cheap for what they are, and they break easy. My first trip into the woods, I snagged a small tree and yanked one partway off.
 

bucket

Super Moderator
Staff member
Super Moderator
Joined
Aug 3, 2010
Posts
28,956
Reaction score
23,466
Location
Usually not in Ohio
First Name
Andy
Truck Year
'77, '78, '79, '84, '88
Truck Model
K5 thru K30
Engine Size
350-454
Well hell, I just replied to the wrong thread, lol.
 

bucket

Super Moderator
Staff member
Super Moderator
Joined
Aug 3, 2010
Posts
28,956
Reaction score
23,466
Location
Usually not in Ohio
First Name
Andy
Truck Year
'77, '78, '79, '84, '88
Truck Model
K5 thru K30
Engine Size
350-454
Thanks for the help. The flares look pretty similar to yours. Could you give me an estimate on how much metal is cut out above the wheel? I just asked this on my other thread not realizing I could've just asked you

And I just accidentally replied to the other thread, lol. I'll try to merge the two and maybe it will all jive.

I believe Bushwacker is the only maker of the large cutout flares for our trucks, so they are probably the same. Doesn't matter if it's front or rear wells, you actually don't take any from the top. Just the sides. I've got a thread around here somewhere that I showed what gets cut, ill have to find it. I'm not sure I have the pictures anymore.
 

Forum statistics

Threads
41,850
Posts
903,456
Members
33,362
Latest member
Dhatch84
Top