Static Drops

[DirtyC30]

4/5 drop using DJM upper and lower control arms with Bell tech springs in front and Bellt Tech shackle and hangers in rear.

You must be registered for see images attach

Looks good, although I am undecided on the extended squares.

 

[blaznlow79]

here is mine

6/8 drop


chassi tec 3" springs and 3" spindles
flip kit in rear

in process of putting a dropped cross member in

 

[chevyman73]

2.5 inch mcgaughy spindles and beltech 2inch coil. Shackle and hanger kit with no over load leaf will flip as well

 

[scmonsterchevy]

here is my first lowered square body its an 82 fleetside with a 350 with a mild cam and headers and the lowering kit is a flip kit in the rear and then 3in coil drop in the from im currently workin on its brother a 82 stepside im gonna bag ill get some pics of that one up soon

You must be registered for see images attach

 

[LS1Cheyenne]

dont know how much its lowered but its as low as i could get away with for driveabilty. front is 4'' off the ground tho.
front - wheels 18x6 tires 26x8
rear - wheels 20x16 tires 31x18x20

 

[therapy]

Spindles and springs up front with flip kit in the rear..

You must be registered for see images attach

 

[J Knight]

4.5/5, 2.5 spindles, 1 round cut off of stock springs, flip in the rear.

 

[C10Adam]

'85 burb

2.5" spindles and 1 coil cut in the front, and flip'd rear

It's currently on jack stands as I am baggin it, complete soon, but this is still static....

You must be registered for see images attach

 

[87hotrod]

I've never seen an ext cab before

 

[asb2106]

Heres my 79 c10
at stock stance

You must be registered for see images attach

with 2.5" spindles and 3" shackles in the rear

You must be registered for see images attach

the way its sitting right now

You must be registered for see images attach

the 4.8 lr4 and 4l80e going in

You must be registered for see images attach

 

[bucket]

Nice truck! When you say 3" shackles, do you mean they are 3 inches longer, or they dropped the truck 3 inches? How much of the bed cross rail did you have to cut?

 

[exclusives01]

1981 gmc 1500

You must be registered for see images attach

Here's my 81 GMC Sierra. Cut coil and a half from front and flipped the axle in the rear. Very cheap way to drop, and if you don't mind a little bounce, it's the least expensive way to make your truck look alot better. Unfortunatly, I was hoping this drop would fix the one inch lean to the driver side but no luck.

Great thread.

 

[J Knight]

You must be registered for see images attach

Here's my 81 GMC Sierra. Cut coil and a half from front and flipped the axle in the rear. Very cheap way to drop, and if you don't mind a little bounce, it's the least expensive way to make your truck look alot better. Unfortunatly, I was hoping this drop would fix the one inch lean to the driver side but no luck.

Great thread.

Looks nice but you shouldnt have any bounce, did you cut out the bumpstop mounts front and rear?

 

[exclusives01]

J Knight:

No haven't cut the bump stop yet. Actually this weekend I will. It really only bumps when I go over ruff streets or railroad tracks.

Anyone:

Looking for the steering column cowl for the 3 speed shifter if anyone has one please let me know. Thank You

 

[StraightTimeStirrups]

Spindles and springs up front with flip kit in the rear..

You must be registered for see images attach

How about more info on this truck along with more photos!

Joe