What have you done to your square lately??

[bucket]

Lolololol

For the first time ever, I had to approve my own damn post

You must be registered for see images attach

 

[TotalyHucked]

It's so weird what it will flag!

 

[Ontheboulder]

all done painting the bumper,thinking I might add some black to the center section to break up the gray. Thoughts??

 

[DoubleDingo]

all done painting the bumper,thinking I might add some black to the center section to break up the gray. Thoughts??

I like the gray, but some black accent wouldn't hurt

 

[Camar068]

all done painting the bumper,thinking I might add some black to the center section to break up the gray. Thoughts??

if your going to put a winch on it, you'll have plenty of break up. Your opinion matters most though. Set the winch on there and see what she looks like.

 

[Ontheboulder]

if your going to put a winch on it, you'll have plenty of break up. Your opinion matters most though. Set the winch on there and see what she looks like.

this is the rear bumper so no winch going on it

 

[Ontheboulder]

I like the gray, but some black accent wouldn't hurt

thats kinda what I am thinking

 

[Ontheboulder]

if your going to put a winch on it, you'll have plenty of break up. Your opinion matters most though. Set the winch on there and see what she looks like.

but a rear winch would be cool if I had a need for it!!

 

[Ontheboulder]

thinking of using some reflective tape on the bumper. Thoughts or ideas!!??

 

[bucket]

thinking of using some reflective tape on the bumper. Thoughts or ideas!!??

Nope. I hate that garbage. The cheap stuff never stays on, the expensive stuff never can be removed. And it looks like trash, imho. Lol.

 

[CoggedBelt75]

Something with a simple fix. I developed a lean condition today while out & about. Found the cause on the back carburetor manifold vacuum port. It was hard to see because of where the crack was located, but by feeling it, no mistaking what was going on. I thought I had replaced these with silicone ones. NOT!

You must be registered for see images attach

 

[Chevrolado]

For my own learning.. how'd you know it was running lean? Good on ya for finding the fix.

Something with a simple fix. I developed a lean condition today while out & about. Found the cause on the back carburetor manifold vacuum port. It was hard to see because of where the crack was located, but by feeling it, no mistaking what was going on. I thought I had replaced these with silicone ones. NOT!

You must be registered for see images attach

 

[CoggedBelt75]

For my own learning.. how'd you know it was running lean? Good on ya for finding the fix.

I run an Innovate A/F gauge.

 

[Chevrolado]

I run an Innovate A/F gauge.

Ooooh, sweet.

 

[DoubleDingo]

I run an Innovate A/F gauge.

That's like cheating