Scissor Jack

[mxer147]

This should work and mount on the inner fender, right?

https://www.amazon.com/gp/product/B0BJV4XV49/

My truck is missing the Jack and I just need to pickup a spare tire so I can drive it more.

 

[NYSquared]

You dont want to lift the truck from the fender, it cant support the weight of the truck. Just jack the axle up. That jack should be fine for what youre looking to do tho.

 

[WebMonkey]

'mount' on inner fender.
where the factory jack was kept.

 

[mxer147]

Yes, that’s what I was referring to in my post.

 

[Turbo4whl]

That scissor jack will work very well. Your truck would have come with a jack that looked more like this one:

You must be registered for see images attach

 

[Soundmound]

I need a jack. Somehow my truck came with two of the handles, but no jack.

 

[mxer147]

The hardware to keep it on the inner fender is still there but no bottle Jack. What’s the maximum lift on the bottle Jack? My truck has 4” lift and larger tires.

 

[squaredeal91]

Looks like it will be close. Might have to cutoff wheel the bottom plate to fit if not. Carry wooden blocks to help with lift.

 

[Dennis71]

Me Two, I need one asap. Thx Dennis 858-245-6432

 

[Ricko1966]

Go bigger! The little ones fold over if you are on any incline,and you dont get to pick where you break down at. The bigger ones are more usefull overall. The little handle that comes with the little ones,don't have the reach or leverage you need. Pictured 2 generic little ones 2 Napa, 1 Mazda pickup factory jack ( top) the Mazda jack is pretty decent and the Mazda,Napa jacks come with a handle long enough to get under the truck. The handle you pictured is is only about a foot. I measured,the Mazda has 2 foot of reach before the bell crank,the Napa has 3 feet,factory has 5 feet.