Lawn/ Garden tractors/ Riding Mowers, Cool Mods and tinkering

[Camar068]

Yep that's the one. Not that bad a job. Maybe it would last longer with some Hilomar sprayed on it.

was very easy. I spent more time cleaning gasket surfaces than disassembly/assembly. The pre-made square sanding blocks came in handy....never really used them until now.

 

[Mr Clean]

I guess this can go here. I built this trailer awhile back. Never did anything with it. My daughter and her husband bought a house. They have no way to mow their lawn. I have a Toro Timecutter. My daily is to tall to put the mower in the bed. So Operation Lower Tailer started today. It came out OK. Gotta put taillights on it, and go register it as a shop built trailer.

 

[Ricko1966]

Do we have any mower engine wiring Gurus on here. I ask because I have some riding mowers I purchased for the engines,but they have several wires on them. I'd imagine a couple are for a voltage regulator and some will be for safety cut offs. If any of you are proficient with this I'll get pics and more info. I'd like to use these engines on different projects. Thanks. Anyone know where to get wiring schematics for Briggs engines?

 

[squaredeal91]

Do we have any mower engine wiring Gurus on here. I ask because I have some riding mowers I purchased for the engines,but they have several wires on them. I'd imagine a couple are for a voltage regulator and some will be for safety cut offs. If any of you are proficient with this I'll get pics and more info. I'd like to use these engines on different projects. Thanks. Anyone know where to get wiring schematics for Briggs engines?

tag me when you get the pics and I'll look at the wires.

 

[82scottsdale62]

I work at a lawn and garden dealership and repair shop, so I get a lot of opportunities to play with scrapped machines.

This is my "crappyman" mower, as I like to call it. It was scrapped because of the original 21hp brigs single went out. It now has a kawasaki 14.5 hp v-twin, the stock 6 speed transaxle, bigger rear tires straight piped exhaust, throttle pedal, and a pulley swap. It tops out around 25mph and pops a pretty scary wheelie.

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach