K5 Blazer spare tire holder

[Rusty Nail]

Simple question about interior mounted spare tire holders that had a carpet cover.

Were they all the same 73-91?

One leg screwed to the passenger wheel well, one screwed to the floor, and one screwed to the bed side.

Adjusted up and down.

Are they all the same? Which is most "correct" for my '75?

 

[1987 GMC Jimmy]

Mine’s just like that.

 

[bucket]

I think in '73 and '74 they mounted to the floor, right behind the seat. And then there was the dealer-installed outside swing away carrier.

 

[Rusty Nail]

Both helpful replies, thanks men!

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

 

[Dougnsalem]

This got me looking for one for mine to put back on it. 79 c30 with the front mount. Is this really what they go for??? Crap, I'll just make one....

You must be registered for see images attach

 

[SDJunkMan]

I saw one at the pick a part the other day, I can check and see if it is still there if you are interested.

 

[Dougnsalem]

I saw one at the pick a part the other day, I can check and see if it is still there if you are interested.

Appreciate it! IF, you are already there. This is the first I've even looked for prices on them. I haven't checked locally, but I kinda doubt I'll find anything. It wasn't real high on my priority list, but if they aren't common to find, it may be smart to get one while it's available....

 

[SDJunkMan]

Appreciate it! IF, you are already there. This is the first I've even looked for prices on them. I haven't checked locally, but I kinda doubt I'll find anything. It wasn't real high on my priority list, but if they aren't common to find, it may be smart to get one while it's available....

Sorry Doug, I meant the Blazer tire holder, not the front bumper one.

I have seen a few trucks with the front bumper one in the area, but not in the pick a part yet. I'll watch for one of those also.

 

[Dougnsalem]

Sorry Doug, I meant the Blazer tire holder, not the front bumper one.

I have seen a few trucks with the front bumper one in the area, but not in the pick a part yet. I'll watch for one of those also.

Lmao. Well, it is a Blazer thread... I'll go sit down and be quiet.

 

[Rusty Nail]

Ok!
Yes please.
You see what i'm dealing with on teh eBay.
I will PM you my infos and @Honky Kong jr will testify to my character. Pretty sure it's okay if I volunteer him (for that )

 

[SDJunkMan]

Ok!
Yes please.
You see what i'm dealing with on teh eBay.
I will PM you my infos and @Honky Kong jr will testify to my character. Pretty sure it's okay if I volunteer him (for that )

Its snowing pretty hard here today, so it may be a day or so before I get over there. I was thinking of grabbing the seats and console out of the Blazer, but hadn't decided. The seats are pretty weathered and the lid of the console is cracked. Guess I better make up my mind.

 

[Honky Kong jr]

Ok!
Yes please.
You see what i'm dealing with on teh eBay.
I will PM you my infos and @Honky Kong jr will testify to my character. Pretty sure it's okay if I volunteer him (for that )

Yup good guy won’t screw ya. @SDJunkMan I sent Rusty 125 lbs and he promptly paid me for it.

 

[Rusty Nail]

I've been talking to the seller of the eBay listing and got him to agree to take a $70 offer, down from $99. Plus the $30 ship + the $28 for the other pieces...he refused my initial $45 offer..
Very anxious to see what the SDJunkman comes up with...
I've been looking for a good while now and even lost an auction two weeks ago when I got outbid over $110 (complete). It's too much money.

So this is Exciting!
Really? You found one simply chillin in a yard?
Wild!
I'm stoked!

You must be registered for see images attach

(+$30.22 ship)

I had just about succumbed to the seeming fact that one of these deals was gonna cost me better than $100..
That's a TON of money that I REALLY don't want to spend (on that) but everytime I go over too big a bump my 32x11.50R15 spare and steel wheel gets airborne and that ain't cool - anymore.
I NEED a $100 spare tire holder in my business. There sure as hell ain't any layin around some Pull-A-Part in OKLAHOMA.

Thank you @Honky Kong jr

 

[SDJunkMan]

I'll try to get over there in the morning, but its snowing right now and the high for tomorrow is supposed to be 2 degrees, so I may not make it. I'll let you know in the morning.

 

[Rusty Nail]

Don't sweat it man, no pressure! I'm posting for the waiting audience as they watch eagerly with baited breath.
I have a viewership to consider. Luckily, you are part of it. <3

You could make a new lid for the console...and the seat MOUNTS are pretty useful/valuable - to guys like us!