chief_shotts
Latest activity Postings About
-
-
chief_shotts replied to the thread Diagnosing mysterious sound from Tran/Tcase.Not when i check the dip stick... but i haven't dropped the pan yet. -
chief_shotts replied to the thread Diagnosing mysterious sound from Tran/Tcase.thanks for the idea. Should help me narrow it down.
-
chief_shotts replied to the thread Diagnosing mysterious sound from Tran/Tcase.The noise is subtle in the video... sounds like a rattle noise that sort of pulsates. comes on at about 5 sec mark then fades at 10 sec...
-
chief_shotts replied to the thread Diagnosing mysterious sound from Tran/Tcase.Ill try to capture a video of the vibe/sound while driving with the trans tunnel exposed. should be noisy/hot test drive
-
chief_shotts replied to the thread Diagnosing mysterious sound from Tran/Tcase.I checked em... one was not as tight as the other two by maybe a 1/8 of a turn or less but that was about it. Definitely not lose
-
chief_shotts replied to the thread Diagnosing mysterious sound from Tran/Tcase.Im not following.. What's wrong with the bolts?
-
chief_shotts replied to the thread Diagnosing mysterious sound from Tran/Tcase.Sound/ vibes existed before and after that linkage was installed. Were you able to hear the noises from the trans in that video?
-
chief_shotts replied to the thread Diagnosing mysterious sound from Tran/Tcase.Ill double check right now.
-
chief_shotts posted the thread Diagnosing mysterious sound from Tran/Tcase in Transmission & Transfer Case.The truck is a 1987 crew cab k30. 383 stroker, turbo 400, np205, d60, gm14bolt. The issue is Ive been experiencing some vibration at...
-
chief_shotts replied to the thread Pinion angle and funky Ubolts.I'll post when I get back to it... probably this weekend.
-
chief_shotts reacted to Blazerbiker's post in the thread Front driveline angles on a lifted square with
Like.
Put the truck frame on jackstands (or a lift) and measure the driveline angle at full droop. Most of the time a modified 1350 is good... -
Good luck Chief
-
chief_shotts replied to the thread Pinion angle and funky Ubolts.I'm gonna call around tomorrow and find some replacements.
-
chief_shotts replied to the thread Pinion angle and funky Ubolts.If only they weren't seized together.. two days of pb blaster prior.. couple hours of off an on blow torch.. some milwaukee 1/2 impact...
-
chief_shotts replied to the thread Pinion angle and funky Ubolts.these block are tapered and i calculated they have about a 2.4deg taper
-
-
Loading…
-
Loading…
