Front discs won’t release

[Scotty D]

Need some help, I went through my brakes a couple of years ago- new master cylinder, calipers, pads, rotors, hoses, proportioning valve. Everything was working great, went to drive it the other day and it didn’t seem to roll like normal (I don’t drive it much as I like)
Found both front brakes hot and locked up after a 5 mile drive.
I cracked the lines on the master (thinking it was stuck but no pressure coming back to the master)
I can’t believe that both calipers are bad, or both hoses are collapsing after about 4 years time
Any ideas?

 

[Edelbrock]

Need some help, I went through my brakes a couple of years ago- new master cylinder, calipers, pads, rotors, hoses, proportioning valve. Everything was working great, went to drive it the other day and it didn’t seem to roll like normal (I don’t drive it much as I like)
Found both front brakes hot and locked up after a 5 mile drive.
I cracked the lines on the master (thinking it was stuck but no pressure coming back to the master)
I can’t believe that both calipers are bad, or both hoses are collapsing after about 4 years time
Any ideas?

Try lubing the caliper pins. Get them locked up again and try cracking open the bleeders on the calipers to see if they release.