-
-
113matsc replied to the thread Proportioning valve vs. load sensing valve.Well, I started from scratch again and bled all the brakes. I managed to get the rear brakes working again, but still a huge amount of...
-
-
113matsc replied to the thread Proportioning valve vs. load sensing valve.Seems like theres different opinions on that Yep, rain and snow has gotten the better of us i southern Norway the last couple of...
-
113matsc replied to the thread Proportioning valve vs. load sensing valve.Anyone have any document or exploded view on How the load sensing valve works inside?
-
113matsc replied to the thread Proportioning valve vs. load sensing valve.Ah, OK! Anyone with other thoughts on the problem? Could it be wrong cylinders in the rear?
-
113matsc replied to the thread Proportioning valve vs. load sensing valve.Thats the thing. Some people say this and other says the brakes got better after removing it. There even was a GM service bulletin to...
-
113matsc replied to the thread Proportioning valve vs. load sensing valve.Thanks. My bad, but the pedal is not going to the floor, but as far as it normally do. I did take notice, as there were a little...
-
113matsc posted the thread Proportioning valve vs. load sensing valve in Suspension, Steering & Brakes.Been doing some brake work on my truck recently. Had some issues last season and recently replaced all the hardware, shoes and cylinders...
-
-
113matsc replied to the thread Tach wire and relay.Allright, thanks. The truck does have HEI. So i will need to look under the dash probably, as it will lead all the way there?
-
113matsc replied to the thread Tach wire and relay.Not sure what you mean? In the pictures I posted you can see the cable connected and disconnected from the tach-slot at the distributor...
-
-
1Hi friends, Was thinking about wiring up a tach on my 85 GMC C25, but when i looked at the distributor, there was already a cable...
-
-
-
Loading…
-
Loading…
