liam
Junior Member
- Joined
- Mar 9, 2024
- Posts
- 21
- Reaction score
- 0
- Location
- Seatle Washington
- First Name
- Liam
- Truck Year
- 1984
- Truck Model
- k20
- Engine Size
- 367
what is the torque spec for a flywheel on a 350 small block
Flywheel
- Thread starter liam
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
liam
Junior Member
- Joined
- Mar 9, 2024
- Posts
- 21
- Reaction score
- 0
- Location
- Seatle Washington
- First Name
- Liam
- Truck Year
- 1984
- Truck Model
- k20
- Engine Size
- 367
Flex plate
Ricko1966
Full Access Member
- Joined
- Apr 11, 2017
- Posts
- 6,557
- Reaction score
- 11,159
- Location
- kansas
- First Name
- Rick
- Truck Year
- 1975
- Truck Model
- c20
- Engine Size
- 350
65 ft lbs,use a star shaped torque sequence,sneak up on final torque in 3 steps. Actually I'd just run them snug with a 3/8 ratchet then go around and get them tight with a 3/8th ratchet,then torque them.
Ricko1966
Full Access Member
- Joined
- Apr 11, 2017
- Posts
- 6,557
- Reaction score
- 11,159
- Location
- kansas
- First Name
- Rick
- Truck Year
- 1975
- Truck Model
- c20
- Engine Size
- 350
They are not torque to yield reuse is fine. Small Block chevy requires no sealer on the flywheel bolts,they don't go to oil. But loctite is not a bad idea. Problem with loctite is it throws off torque specs,so use some common sense.
Similar threads
