- Joined
- Feb 5, 2014
- Posts
- 4,191
- Reaction score
- 3,081
- Location
- Kentucky
- First Name
- David
- Truck Year
- 1986
- Truck Model
- K10/LM7 5.3/4L60e/np208/3.73/32"
- Engine Size
- 10 yrs Air Force
How much clearance do I need between the exhaust manifolds and the motor mounts?
I'm putting a '75 350 in an 86 K10 using the 86 motor mounts. The driver side, from what I can tell, is touching the top side of the motor mount.
Can I use longer bolts and "lift" the engine using spacers/washers between the mounts and engine?
The '75 mounts looked the same but I didn't spend a lot of time comparing. I put the exhaust on after the engine was installed, not prior.
Thanks In Advance
'Maro
I'm putting a '75 350 in an 86 K10 using the 86 motor mounts. The driver side, from what I can tell, is touching the top side of the motor mount.
Can I use longer bolts and "lift" the engine using spacers/washers between the mounts and engine?
The '75 mounts looked the same but I didn't spend a lot of time comparing. I put the exhaust on after the engine was installed, not prior.
Thanks In Advance
'Maro
