-
-
Sspedigo replied to the thread TH350 Cooler Lines.wondering on these cooler lines, just put in a new engine and haven’t hooked everything up yet. The old lines that were in there are...
-
SSeems like this guy might have what you are looking for.
-
SYes - originally is is spliced to a red wire (at the fusible link) that attaches to you starter with another red wire and black battery...
-
Sspedigo replied to the thread Starter and Alternator wires.ok. makes more sense now. so is the sensing wire from the alternator one of the two wires that are joined together on the starter...
-
SThis is how it was explained to me- - sensing voltage at the alternator output - seriously hamstrings the system - it's like a...
-
Sspedigo replied to the thread Starter and Alternator wires.clarification please. i’m checking all wiring from previous owner and want to be sure it’s correct and understand what options i have...
-
Sspedigo replied to the thread Exhaust collectors for manifolds.so when these originally installed there were no other gaskets/donuts above or below the heat riser?
-
Sspedigo replied to the thread exhaust question, heat riser valve connections.so, definitely a flat gasket between manifold and heat riser? a donut on the bottom of heat riser even though it already has cast donut...
-
-
Sspedigo replied to the thread exhaust question, heat riser valve connections.OK, I just found this buried on my phone. Didn’t know I had it. Looks like the flat side of the heat riser connects directly to the...
-
-
Sspedigo replied to the thread exhaust question, heat riser valve connections.like you said, maybe they’re not the original manifolds and were never intended to meet up with the heat riser and that’s why I’ve had...
-
Sspedigo replied to the thread exhaust question, heat riser valve connections.so, the one with the bolts in it on top is the one like I have, with the integral flange? The one I have is not aftermarket it’s OEM...
-
Sspedigo reacted to fast 99's post in the thread exhaust question, heat riser valve connections with
Like.
Earlier small blocks use a flange on the header pipe, no gasket. Not a great design. Engine movement and frame twist would sometimes... -
Sspedigo reacted to 75gmck25's post in the thread exhaust question, heat riser valve connections with Like.
There is a flat gasket with 3 holes on the manifold side, and a donut gasket to mate with the exhaust pipe. My pipes had a slight flare...
-
Sputting a new engine in my 79 and finally got around to pulling the old one on Saturday. For the few months that I’ve had the truck it...
-
-
-
Loading…
-
Loading…
