Latest activity Postings About
-
-
Kk10kole replied to the thread 350 to 454 in a K10: What Motor Mounts?.That sounds like a good future project...
-
Klook at swapping in a rear 14 bolt full floater 8 lug with an lsd ( can be found cheap from a wrecked C20 ). You will need a matching...
-
KLikely you will need this fuel pump for frame clearance. Get the lower power steering pump bracket to go with the BB...
-
Kk10kole replied to the thread 350 to 454 in a K10: What Motor Mounts?.The 454 I have was actually swapped into another K10 before, but it was missing a fan shroud, had destroyed motor mounts and had some...
-
Kk10kole replied to the thread 350 to 454 in a K10: What Motor Mounts?.Here's a picture of the truck on a recent grocery run. Needs some paint, but it's pretty solid.
-
-
Kk10kole replied to the thread 350 to 454 in a K10: What Motor Mounts?.Bill, that's the first I've heard of those plates. Seems like GM really liked to mix things up. Gordon, I wasn't planning on changing...
-
Kk10kole replied to the thread 350 to 454 in a K10: What Motor Mounts?.Ok, that makes sense. Thanks again! It's weird that GM decided to use different motor mounts and perches when they are more or less...
-
Kk10kole replied to the thread 350 to 454 in a K10: What Motor Mounts?.Thanks, bucket! That's good to hear. Worst case, if I get it together and have issues then I could always shim the mounts.
-
KHi all, Long time lurker, first time poster. There is so much good info on here! I am looking to swap a 454 into my '73 K10 short...
-
-
Loading…
-
Loading…
