D
DSnyde34
Latest activity Postings About
-
-
DI had trouble with my 82 C20 w/factory 454 when I tried to upgrade my mounts to urethane, everything I ordered was too small even just...
-
DDSnyde34 replied to the thread Motor Mounts for 454.What I ended up doing was using new small block mounts and then we put aluminum plates as shims between the mounts and the perches to...
-
DDSnyde34 replied to the thread K-30 12v Swap.Some updates on the project. I found a good deal on a motor so I went ahead and bought it. Its a 1997 12v with a p-pump. Came out of a...
-
-
DDSnyde34 replied to the thread K-30 12v Swap.Blzerbiker thanks for the info, I haven't looked much into the steering. What would you recommend for a steering upgrade. Should I just...
-
DI can confirm the ord springs handle the weight well. Mine are a 5" lift with cross over steering. I like it alot. Rob bonnie mounts...
-
DIve done this swap in my 75 k20. I have an intercooled ve pump cummins with an nv4500 and a round pattern 205 t case with no adapters at...
-
DLook at Rob Bonney Fab for motor mount parts. Like others have said, you'll have the best luck with a trans that was native with the...
-
DI would just do seals and gaskets. 100k on that engine is almost nothing. Unless it's been abused I'd say it's just getting broke in at 100k
-
DDSnyde34 replied to the thread K-30 12v Swap.Ricko thanks for the link, that is a super cool read! I think I may have found a motor for the truck(1997 12v Cummins). I am going to...
-
Dhttps://www.gmsquarebody.com/threads/6-7-cummins-suburban-build.39905/unread Give this a read.
-
DIf you don't use a dodge made 4 cummins transmission you will need an adapter like me. My transmission Donor truck was a 1990 F-250...
-
DMan, if we only had more time & money... carry on & good luck with your build. HS
-
DDSnyde34 replied to the thread K-30 12v Swap.If I can't find a 6-speed a NV4500 is my plan B. The truck is gonna be used on the farm so it will be towing hay trailers/stock trailers...
-
DIf I could have afforded it at the time I would have went with an NV4500 for transmission behind the 12valve. Instead I used a ZF5 that...
-
-
Loading…
-
Loading…
