Donor truck price???

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Squarehead1984

Junior Member
Joined
Mar 15, 2018
Posts
25
Reaction score
12
Location
Tuscola
First Name
Tommy
Truck Year
1984
Truck Model
C20
Engine Size
468
There is a farmer I used to work for back in the late 80’s and he had an 85 c20. It was his daily driven truck up until about 25 years ago. He started driving a dodge Cummins and the 85 turned into the farm truck. A hired hand didn’t set the brakes on a bobtail grain truck and it rolled back into the 85 and ruined the hood and cab so it then turned into the truck that moved trailers around the yard since you couldn’t get a windshield in it anymore. The trans went out about 20 years ago and has sat since. It’s a factory 454, th400 and does have a full floating rearend. I asked about buying the truck and using what I need and then making a trailer out of it.

What would be a good price for it? I need the rearend, radiator, engine, and misc door latch stuff.

I was thinking $500 tops

What do y’all think!!!
 

1987 GMC Jimmy

Automobile Hoarder
Joined
Jan 23, 2016
Posts
5,848
Reaction score
2,387
Location
Mississippi
First Name
Jesse
Truck Year
1987
Truck Model
V1500 Jimmy
Engine Size
350
Have any pictures? I might offer $400 and see what happens. It’s been sitting a while, but it sounds like there are some worthwhile goodies there.
 

climb-101

Full Access Member
Joined
Mar 12, 2018
Posts
262
Reaction score
278
Location
montana
First Name
seth
Truck Year
974
Truck Model
c2 crew cab
Engine Size
6.0 LS
i would off $300 and see what he says. it’s at least a starting point. $500 is prob the most i would pay.
 

Rusty Nail

Full Access Member
Joined
Jan 29, 2015
Posts
9,790
Reaction score
9,689
Location
the other side of the internet
First Name
Rusty
Truck Year
1977
Truck Model
C20
Engine Size
350sbc
I saw a 80s "g body" listed as a "parts car" the other day on Craigslist for $250 !
I looked at the pictures and it was ROUGH but I need body panels...and it was a complete car.
I started looking for the money RIGHT THEN.
When I found it to spend on a "parts car" it was already gone.

SO!

I think $250 is too cheap LOL! :(
 
Last edited:

HotRodPC

Administrator
Staff member
Admin
Joined
Aug 29, 2010
Posts
47,014
Reaction score
9,014
Location
OKC, OK
First Name
HotRod
Truck Year
85 K20 LWB
Truck Model
Silverado
Engine Size
454 - Turbo 400 - 3.73
I like all of the above answers. I'd offer $300. He just might take it. But I'd go no more than $500 with that age. Being 454, Th400, and FF rear axle. You've got $500 worth in cores alone, so if it runs and other parts too, you won't get hurt at $500, but I'd sure like $300 better.
 

Squarehead1984

Junior Member
Joined
Mar 15, 2018
Posts
25
Reaction score
12
Location
Tuscola
First Name
Tommy
Truck Year
1984
Truck Model
C20
Engine Size
468
Alrighty I’ll see what happens.

They also have a 1974 c20 454 camper special that is original and also a 1974-3 ish c10 454 all original. None of them run and haven’t for years.
 

HotRodPC

Administrator
Staff member
Admin
Joined
Aug 29, 2010
Posts
47,014
Reaction score
9,014
Location
OKC, OK
First Name
HotRod
Truck Year
85 K20 LWB
Truck Model
Silverado
Engine Size
454 - Turbo 400 - 3.73
Alrighty I’ll see what happens.

They also have a 1974 c20 454 camper special that is original and also a 1974-3 ish c10 454 all original. None of them run and haven’t for years.
Scrap is down low right now to about $100-$120 per ton. That means we should be able to scoop up trucks like that for $300-$500. I wouldn't mind having one of those older 74 ish Big blocks with their Th400's. IIRC, that's well before Peanut Port heads. Still smogger heads, but not PeePeez.
 

Forum statistics

Threads
42,165
Posts
910,442
Members
33,660
Latest member
1987R10Man
Top