Can't get rid of play in the steering

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Steppin Razor

Full Access Member
Joined
Apr 21, 2023
Posts
54
Reaction score
41
Location
Houston
First Name
S
Truck Year
1977
Truck Model
C10 silverado
Engine Size
350
My k10 was loose as hell because the pitman arm was not tight enough. I had installed it to torque and ran it for a year.....slop. Local shop put some uga-duga's on it.....fixed immediately.
I will try that. I tightened it by hand, not impact.
 

Edelbrock

Full Access Member
Joined
Mar 28, 2025
Posts
171
Reaction score
151
Location
Earth
First Name
Grumba
Truck Year
1977
Truck Model
K5 Blazer
Engine Size
400
Schwab used to be top shelf. Since the old man left, it's not the same and the popcorn sucks.
Agreed, they used to be very good. Now all they want to do is scare people into spending top dollar for unneeded repairs. I know a lady that wanted a vehicle inspection. I checked it out and everything was fine. All she needed was new tires, as hers were very old and dry rotted. So she went to Les Schwab for tires, and they sold her a new battery and a complete brake job. They claimed that the brakes were so bad that they might "lock up" by themselves and cause an accident. The brakes were no where near the wear indicators, and the battery tested just fine when I checked it.

Les Schwab Tire Centers was acquired by Meritage Group in September 2020. The sale, finalized in November 2020, ended nearly seven decades of family ownership.
 

Radiohead

That guy on the Columbia
Joined
Mar 17, 2022
Posts
2,517
Reaction score
8,209
Location
Low Earth Orbit where it's safer
First Name
Eric
Truck Year
MCMLXXIX
Truck Model
C-20 Silverado Camper Special
Engine Size
454 crazy cubes, or 7.4 luscious litres
I came from the garages and fishing for work was common then, but the downright chicanery that passes for customer care these days is pathetic. I know we all have to eat, but filet mignon on every job? That's the kind of chit that gives us all a bad name. Especially when the technicians use the parts cannon approach to diagnostic procedures.
 

sublimeobs

Junior Member
Joined
Nov 10, 2023
Posts
21
Reaction score
28
Location
NELA
First Name
Pigpen
Truck Year
1984
Truck Model
C10
Engine Size
355
Torque spec on that Pitman Arm nut is fairly high. I replaced mine and think it called for 185 ft-lbs.
 

87chevy_com

Member
Joined
May 7, 2023
Posts
33
Reaction score
22
Location
Texas
First Name
Clint
Truck Year
1987
Truck Model
R10
Engine Size
L83
If you go to Les Schwab and ask them to tell you what is wrong with the steering - they will diagnose it for free in the hopes that you will pay them to fix it. Just ask for a repair quote, and it will list all the issues that they can find. The specialize in these types of diagnostics.

this type of action is what causes problems in the industry... if they diag correctly it because you can figure it out, have them fix it.... smh.......

if they don't fix it with their diag, hold them accountable. If you think you can bring a car somewhere and get a pinpoint diagnosis for free .. well.... share that link too im sure that business will close down soon too for all the freeloaders that will abuse the "service"
 

Radiohead

That guy on the Columbia
Joined
Mar 17, 2022
Posts
2,517
Reaction score
8,209
Location
Low Earth Orbit where it's safer
First Name
Eric
Truck Year
MCMLXXIX
Truck Model
C-20 Silverado Camper Special
Engine Size
454 crazy cubes, or 7.4 luscious litres
this type of action is what causes problems in the industry... if they diag correctly it because you can figure it out, have them fix it.... smh.......

if they don't fix it with their diag, hold them accountable. If you think you can bring a car somewhere and get a pinpoint diagnosis for free .. well.... share that link too im sure that business will close down soon too for all the freeloaders that will abuse the "service"
This is the other side of the coin. It's not really fair to ask for free services like that, I can't do free work for folks either. But the over the top upselling is ridiculous too.

So, have we found the definitive source yet? Something is moving around, it just hasn't made itself obvious
 

Latest posts

Forum statistics

Threads
45,575
Posts
986,719
Members
38,665
Latest member
Dons79C10
Top