Search results

  1. john ward

    Door lock relay whereabouts.

    Hi all looking for the door lock relay on 83 c10 is it under dash or hood ? anyone got a pic.
  2. john ward

    Tcc lockup kit problem 700r4.

    Hi all just trying to fit a TCI tcc kit in my 700r4 just pulled sump but now confused as found a part that i have not seen in any other how to sites, its a 83 c10 but i think the trans is 92, has plug on side (the 4 pin one) but nothing connected at all vac thing missing as well near brake...
  3. john ward

    Fuse block

    Does anyone make a fuse panel the same as the original one for the 83 c10 ?
  4. john ward

    Speedo cable. type?

    Are all the sq body cables the same at gauge end ? seems mine not going in to catch the clip.
  5. john ward

    Hi all does this look like the right float for a Holley 4160 ?

  6. john ward

    Headlight door 1983 c10

    Would the 86 c10 headlight doors fit a 83 looking for plain without moulding holes etc in the middle.
  7. john ward

    Trans mount id ?

    Hi all need a id on this trans mount part no etc the one on the top is the one i need with the small offset or no offset had a couple from Rockauto but not same bottom in pick, not sure what its of but its on homemade crossmember on a 80s c10 that has been well messed with. also pic of...
  8. john ward

    700r4 Question ?

    Can you use a none vent yoke in place of vented, or could you vent the trans easy to get to use it ?
  9. john ward

    Gear ratio ?

    Was 2.56;1 rear end used in any c10 trucks 79 up ?.
  10. john ward

    Hi all stepside..

    Looking for the rough weight of 83 c10 swb stepside bed ?.
  11. john ward

    Removing fuel tank.

    Going to remove one of the tanks on my c10 as only one works anyway, plus filling both in uk is like saving for a holiday lol, the tank i will be using is the driver side it has 3 pipes that i can see can i just cap one or do i need to use all three, i can't seem to find a good article on...
  12. john ward

    Leaf spring bushes ?

    Anyone know size OD of bushes 83 c10 swb 2wd, 4 leaf ? are all six the same ?.
  13. john ward

    Frame cracked.

    Hi anyone had problem with frame cracking and breaking up around the front shock mounting bolt,was thinking about large thick washer welded in, any recommendations would help, did notice bolt was loos when i took of mabe why cracked.
  14. john ward

    83 c10 proportioning valve ?

    Is there any rubber parts in the valve as i have to replace all rubber parts in brake system as someone has mixed the type of fluids and lots of jelly crap.
  15. john ward

    83 c10 proportioning unit line fittings

    Looking for the type of fittings of line ends for the front brakes eg bubble or flare ?
  16. john ward

    Tyre on 6 1/2 ?

    Hi all would a 235-60-15 be ok on a 6.5 rim ?, anyone using or have used this combo..
  17. john ward

    Double or single flair on front brake lines, 83 square.?

    Found no info, so any recommendations please.
  18. john ward

    Above glove box box ?

    Hi all not sure if right place but any one know what the box is bolted to underside of dash on pass side ?. 83 c10.
  19. john ward

    700r4 tail housing ?

    Hi all looking for info for my trans,i have a 83 c10 with according to numbers is a 1992 box, the speedo is cable at gauge but wire at g/box, i need to know if poss cars trucks that have the 71/2 in tail housing with the 2in hole so i can run cable speedo, the trans mount is on the trans not...
  20. john ward

    700R4 speedo ?

    Hi all a new to this forum, i have a 83 c10 with a 700r4,according to the numbers its a 1991 trans with the vss, would a th350 tail housing fit my trans to get the cable speedo working as mine has the small vss hole.

Latest posts

Forum statistics

Threads
42,188
Posts
910,964
Members
33,683
Latest member
jturner
Top