GMC Savana, Plus a Chevy Express Now Too

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

bucket

Super Moderator
Staff member
Super Moderator
Joined
Aug 3, 2010
Posts
28,956
Reaction score
23,465
Location
Usually not in Ohio
First Name
Andy
Truck Year
'77, '78, '79, '84, '88
Truck Model
K5 thru K30
Engine Size
350-454
Seat and seatbelt installed. It's actually the incorrect seat, but oddly it doesn't bother me, it's much better than the Ford van seat that the seller had installed.

You must be registered for see images attach


The old seat:
You must be registered for see images attach


Here's the big lump in the floor mat for those modules GM decided to mount on the floor between the front seats. If you were to step in the area immediately surrounding the cover, I could see the floor mat possibly ripping.
You must be registered for see images attach


I kind of get a kick out of how utilitarian these vans are, especially considering this van is essentially identical to the current offering. If they built an SUV in the same way they build these vans, it probably wouldn't go over very well.
 

bucket

Super Moderator
Staff member
Super Moderator
Joined
Aug 3, 2010
Posts
28,956
Reaction score
23,465
Location
Usually not in Ohio
First Name
Andy
Truck Year
'77, '78, '79, '84, '88
Truck Model
K5 thru K30
Engine Size
350-454
Did a little bit of trial and error testing on one of the wheels. I picked up a Mother's Power Cone and also a metal polish that I had not heard of before.

Gave it a whirl as it was, just out of curiosity.
You must be registered for see images attach


It didn't even touch the corrosion.
You must be registered for see images attach


So then, things got serious with 180 Grit on the 3" DA.
You must be registered for see images attach


I hit the rough spots with the DA, then gave that polish a try again. I'm not impressed with it at all. It probably works well for a final polish though.
You must be registered for see images attach


Tried some Mother's that is probably 10 years old and it worked much better in the sanded areas.
You must be registered for see images attach
 

bucket

Super Moderator
Staff member
Super Moderator
Joined
Aug 3, 2010
Posts
28,956
Reaction score
23,465
Location
Usually not in Ohio
First Name
Andy
Truck Year
'77, '78, '79, '84, '88
Truck Model
K5 thru K30
Engine Size
350-454
Here's a close-up showing what is left of the 180 Grit scratches.
You must be registered for see images attach


I need to get a box of 320 grit discs and go at it again. First with Mother's and then a final once-over with Autosol. That should get it plenty nice enough for a daily driven family van. Then 3 more wheels to go.
 

bucket

Super Moderator
Staff member
Super Moderator
Joined
Aug 3, 2010
Posts
28,956
Reaction score
23,465
Location
Usually not in Ohio
First Name
Andy
Truck Year
'77, '78, '79, '84, '88
Truck Model
K5 thru K30
Engine Size
350-454
Today the van got new brakes front and rear, along with a new set of 265/75/16's on the GM aluminum wheels. They are load range E, white letters out of course! I decided on the Mastercrafts because I like the looks of them and I wanted to give the local tire place more business, rather than just ordering tires from Summit and having them install them.

You must be registered for see images attach


You must be registered for see images attach


Next up, buy a pair of composite headlights and install the chrome grille.
 

SirRobyn0

Full Access Member
Joined
Dec 6, 2019
Posts
6,698
Reaction score
11,148
Location
In the woods in Western Washington
First Name
Rob
Truck Year
1984
Truck Model
C20
Engine Size
305
Lookin' good with the new tires! A little off topic on your Mother's products, at the shop we do headlight restorations, on the plastic lens units. We use Mother's compound after sanding and mirror glaze as a finisher. I'm hardly knowledgeable where it comes to waxes, compounds and polishes, but talk about easy to apply. I use the Mother's mirror glaze on the square when I want it to shine and I don't want to work to hard lol.
 

bigcountry78

Full Access Member
Joined
Apr 16, 2013
Posts
3,600
Reaction score
8,589
Location
Hickory, North Carolina
First Name
James
Truck Year
1978
Truck Model
K10 Custom Deluxe
Engine Size
350
Not sure how I missed this, but I like the progress so far. The wheels really set it off. I know the 4.8 wasn’t your first choice, but they’re great motors. My family has a 2001 Silverado we bought new, only options are ac, automatic transmission, and the 4.8. Absolutely bare bones everything else. But that little guy is pushing 300k, never missed a beat, and only seeps a bit of oil from the valve covers.
 

bucket

Super Moderator
Staff member
Super Moderator
Joined
Aug 3, 2010
Posts
28,956
Reaction score
23,465
Location
Usually not in Ohio
First Name
Andy
Truck Year
'77, '78, '79, '84, '88
Truck Model
K5 thru K30
Engine Size
350-454
Not sure how I missed this, but I like the progress so far. The wheels really set it off. I know the 4.8 wasn’t your first choice, but they’re great motors. My family has a 2001 Silverado we bought new, only options are ac, automatic transmission, and the 4.8. Absolutely bare bones everything else. But that little guy is pushing 300k, never missed a beat, and only seeps a bit of oil from the valve covers.

The 4.8 is very adequate so far, it moves the van and passengers along just fine. I'm still very curious how it is going to do with pulling trailers around. I expect to be disappointed lol, but maybe the low gearing in the trans will save the day.
 

bigcountry78

Full Access Member
Joined
Apr 16, 2013
Posts
3,600
Reaction score
8,589
Location
Hickory, North Carolina
First Name
James
Truck Year
1978
Truck Model
K10 Custom Deluxe
Engine Size
350
The 4.8 is very adequate so far, it moves the van and passengers along just fine. I'm still very curious how it is going to do with pulling trailers around. I expect to be disappointed lol, but maybe the low gearing in the trans will save the day.
Yea I wouldn’t expect miracles. It’s pretty peppy in our farm truck still, but it’s a 2wd, single cab short bed. Big difference in weight between it and your junior school bus up there.
 

bucket

Super Moderator
Staff member
Super Moderator
Joined
Aug 3, 2010
Posts
28,956
Reaction score
23,465
Location
Usually not in Ohio
First Name
Andy
Truck Year
'77, '78, '79, '84, '88
Truck Model
K5 thru K30
Engine Size
350-454
No pictures yet, but I bought another van, lol. This one is another extended wheelbase passenger van, it's a '00 with a 350/4L80e combo. No rust anywhere (it's down here in Blackstone) but it may or may not need an engine. If at least the short block ends up being ok, I'll fix it and drive it.
 

animal

Super Moderator
Staff member
Super Moderator
Joined
Jul 30, 2010
Posts
5,408
Reaction score
3,496
Location
Georgia
First Name
Lee
Truck Year
1986
Truck Model
c10 silverado
Engine Size
350ish
No pictures yet, but I bought another van, lol. This one is another extended wheelbase passenger van, it's a '00 with a 350/4L80e combo. No rust anywhere (it's down here in Blackstone) but it may or may not need an engine. If at least the short block ends up being ok, I'll fix it and drive it.
Ya know. I think you need some additional toys. I am glad you bought another one :wave:
 

bucket

Super Moderator
Staff member
Super Moderator
Joined
Aug 3, 2010
Posts
28,956
Reaction score
23,465
Location
Usually not in Ohio
First Name
Andy
Truck Year
'77, '78, '79, '84, '88
Truck Model
K5 thru K30
Engine Size
350-454
Well it all started like this:

I was driving past a friend's shop, when I remembered he had a passenger van sitting out back. So I stopped to see if it had seats in it. It did. So I texted my friend to see if he would be willing to sell the cloth seats. He responded with "Would you be interested in buying the entire van?" And the rest is history, lol.
 

bucket

Super Moderator
Staff member
Super Moderator
Joined
Aug 3, 2010
Posts
28,956
Reaction score
23,465
Location
Usually not in Ohio
First Name
Andy
Truck Year
'77, '78, '79, '84, '88
Truck Model
K5 thru K30
Engine Size
350-454
Being a southern VA rig it's whole life, it's super clean on the underside despite sitting in the grass for the last 4 years.
You must be registered for see images attach


At it's new resting place for the time being:
You must be registered for see images attach
 

RoryH19

Full Access Member
Joined
Aug 21, 2015
Posts
1,668
Reaction score
1,081
Location
Texas
First Name
Rory
Truck Year
1987
Truck Model
R10 Silverado SWB
Engine Size
350 TBI
Being a southern VA rig it's whole life, it's super clean on the underside despite sitting in the grass for the last 4 years.
You must be registered for see images attach


At it's new resting place for the time being:
You must be registered for see images attach
Too funny.
The only thing that keeps me from having as many cars as you is the space.
Not sure if that's good or bad.
 

Forum statistics

Threads
41,848
Posts
903,420
Members
33,362
Latest member
Dhatch84
Top