eherbaugh
Junior Member
- Joined
- Apr 17, 2025
- Posts
- 6
- Reaction score
- 9
- Location
- Summerville, SC
- First Name
- Eli
- Truck Year
- 1985
- Truck Model
- C10 Stepside
- Engine Size
- 350
I have a 85 C10 two speed wiper system. I bought a new wiper motor and replaced it. I also replaced the wiper switch in the column. This does not have the delay system. So when I turn on the wiper switch it turns on the dash lights and not the wipers. I performed the wiper test using a jumper at the connector at the base of the steering column and when using the jumper to ground I can get hi and low speed to work.
Did I short out the new switch possibly? Any help would be great. I’m to the point that I may just run a toggle switch to ground to at least get the wipers working.
Did I short out the new switch possibly? Any help would be great. I’m to the point that I may just run a toggle switch to ground to at least get the wipers working.