TommyGuns
Latest activity Postings About
-
-
TommyGuns replied to the thread Pro Flo 4 with Delphi FE0114 or ACDelco EP381.Attached is a corrected wiring diagram. The previous one would short circuit whenever the left tank was selected. Circuit numbers, wire... -
TommyGuns replied to the thread Pro Flo 4 with Delphi FE0114 or ACDelco EP381.With some googling I came up with the attached wiring design. It looks good to me, but I'd appreciate a sanity check from y'all before I...
-
TommyGuns reacted to SquareRoot's post in the thread Pro Flo 4 with Delphi FE0114 or ACDelco EP381 with
Like.
I had issues with under hood heat affecting the pump in the sump. I retained the steel crossover lines for convenience but I wouldn't... -
TommyGuns replied to the thread Pro Flo 4 with Delphi FE0114 or ACDelco EP381.This is the main reason why I am converting the fuel system now. The fuel sump.. It was great for getting the truck driving...
-
TommyGuns reacted to SquareRoot's post in the thread Pro Flo 4 with Delphi FE0114 or ACDelco EP381 with Like.
I have the exact same setup. 350, PF4, dual 20 gal tanks, two Delphi FE0114 pumps. I initially used the remote sump but got tired of...
-
TommyGuns reacted to Frankenchevy's post in the thread Pro Flo 4 with Delphi FE0114 or ACDelco EP381 with Like.
No, that’s what I was getting at. Same 29lbs/hr injectors different fuel pressure regulator. The injector’s rating is separate from the...
-
TommyGuns reacted to Ricko1966's post in the thread Pro Flo 4 with Delphi FE0114 or ACDelco EP381 with Like.
Just using the name delphi/Delco is no longer a qaurantee of a better part Delco now has 3 lines consumer grade,mid grade and dealer...
-
TommyGuns replied to the thread Pro Flo 4 with Delphi FE0114 or ACDelco EP381.I'm definitely looking at Walbro, Aeromotive as well. I was leaning toward Delphi and AC Delco due to their history with GM, but my...
-
TommyGuns replied to the thread Pro Flo 4 with Delphi FE0114 or ACDelco EP381.Perhaps I'm confused. The injectors I have are 29 lb/hr, 58 PSI injectors. If I want to run 29 lb/hr at 43 PSI, wouldn't I need to...
-
TommyGuns replied to the thread Pro Flo 4 with Delphi FE0114 or ACDelco EP381.Right, and the fuel sump I'm using has a built in vacuum adjusted fuel pressure regulator. Part of the installation instructions are to...
-
TommyGuns reacted to Vbb199's post in the thread Pro Flo 4 with Delphi FE0114 or ACDelco EP381 with Like.
Then the ep381 will more than suite your needs. Up to 400hp.
-
TommyGuns replied to the thread Pro Flo 4 with Delphi FE0114 or ACDelco EP381.For clarity, this is the kit that is installed on my truck...
-
TommyGuns replied to the thread Pro Flo 4 with Delphi FE0114 or ACDelco EP381.No idea. I didn't build the motor and I haven't had it on a dyno. Putting it on a dyno wasn't on my to-do list for the truck. Apart from...
-
TommyGuns reacted to Doppleganger's post in the thread Pro Flo 4 with Delphi FE0114 or ACDelco EP381 with Like.
Doesn't sound like he has anything in there at the moment - just using Edelbrocks add-on sump.
-
TommyGuns replied to the thread Pro Flo 4 with Delphi FE0114 or ACDelco EP381.Even if I go with the EP381, that pump is rated less than the "required" flow rate of 57 GPH per the Edelbrock Pro Flo 4 instructions...
-
-
Loading…
-
Loading…
