-
-
496bb replied to the thread 1984 Suburban Interior Panels the go over the Fenders.Another thing to consider - the Burbs with the plastic panels surrounding the windows and side panels - seem to have more issues with... -
496bb replied to the thread part ID & smog pump removal.Yep, that's what I plan to do. Want to replace unknown age heater hoses anyway, cheap insurance. Gonna do a backflush with the current...
-
496bb replied to the thread Cruise Control Bracket.Were you adding cruise to a non equipped truck? My truck does not have cruise, but I have that actuator and have yet to determine what...
-
496bb replied to the thread part ID & smog pump removal.Lots of good youtube videos to help with this swap, pretty straightfoward. One I found that had a few bits that I particularly liked...
-
496bb replied to the thread part ID & smog pump removal.It does have coolant hoses, I'll try and remember to post a reference pic in case anyone needs it. Front hose goes into intake next to...
-
496bb replied to the thread part ID & smog pump removal.My reading also indicates they didn't make a big block TBI specific intake til 91 maybe, or possibly not at all for Mark IV My reading...
-
496bb replied to the thread part ID & smog pump removal.Oh no, taking lots of pics before, and everything in a box once removed. Leaving all the TBI wiring intact and tucked away neatly.
-
496bb replied to the thread part ID & smog pump removal.1987 was first year for TBI, factory used an adapter plate and the same Qjet intake used previously.
-
About to swap from TBI to carb (NO comments from the TBI lovers, you have no idea my situation and I don't care how well yours runs)...
-
-
496bb replied to the thread Suburban Interior Trim.Mine is a Custom Deluxe 1987 - no trim in the back. I've heard others mention rust around the windows, and I too think there may be...
-
Anybody still doing the Autometer gauges in the factory bezel, with new ideas for such? I have a 90% complete set of new guages, and a...
-
Going to do a cooling system flush before starting intake swap, and I'm going to replace radiator and heater hoses, etc while I'm at it...
-
496bb replied to the thread Suburban Rear Heat & AC removal/installation/compatability.Reviving this thread, as I would like to add rear AC as well. I can see from the diagrams on of the parts sites that the compressor...
-
496bb replied to the thread New member from AL.Thanks for all the welcome posts! How many posts are needed to make a WTB post in the wanted section?
-
496bb replied to the thread Adding gauges.Bears208, I need more details and info on your gauge cluster mods! I have all the Phantom gauges except speedo from another project...
-
-
Loading…
-
Loading…
