What have you done to your square lately??

[bucket]

Got my intake back today from the metal polishing shop. They did an amazing job, looks fantastic!

The manifold is a 1960s Weiand dual plane manifold that actually has the correct way to pronounce Weiand cast right into it: “Say Why-And”. The polishing shop saved the lettering for me.

I dropped it in place just to make sure I could handle it easily by myself leaning over the engine. First attempt was awkward so made a handle out of a piece of aluminum angle and put a guide stud in the front right bolt hole. That worked MUCH better. Tomorrow I’ll install it, bolt it down and get ‘er running!

Before:

You must be registered for see images attach

Now:

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

Well slap my ass and call me Suzie! That's shiny!

 

[Tank6x2]

Engaged hover mode

You must be registered for see images attach

And loaded everything up in Goldie to go to the tire shop tomorrow

You must be registered for see images attach

Everytime- Envy! Looking good though!

 

[Tank6x2]

Well slap my ass and call me Suzie! That's shiny!

Hmm - nope - will not do either- but a lovely offer - I will negate to indulge you in your |~|omo-erotica of any kind ! Lol

 

[Mr Clean]

Well slap my ass and call me Suzie! That's shiny!

Suzie.... the ass spanking will come at a different time...

 

[Tank6x2]

Suzie.... the ass spanking will come at a different time...

And we just found out why @Mr Clean is bald and sells detergent for a living -

 

[WFarm]

xc_hide_links_from_guests_guests_error_hide_media

 

[TotalyHucked]

What size brake kit is that

The front is 13" rotors and GMT800 '05-07 2-piston calipers. The rear is a Wilwood 140-12569 kit with 12.19" rotors and floating 2-piston calipers. This thing stops amazing!

 

[Mr Clean]

The front is 13" rotors and GMT800 '05-07 2-piston calipers. The rear is a Wilwood 140-12569 kit with 12.19" rotors and floating 2-piston calipers. This thing stops amazing!

Do you have a Hydro booster? If you don't might want to consider it. My first Hydro Boost was in my 85 Shortbed. All stock brakes, and it stopped on a dime. I run Hydro boosters in all of my trucks.

 

[TotalyHucked]

Do you have a Hydro booster? If you don't might want to consider it. My first Hydro Boost was in my 85 Shortbed. All stock brakes, and it stopped on a dime. I run Hydro boosters in all of my trucks.

Nope, it's the stock booster with a GMT800 Tahoe master and a ~2000ish S10 reservoir. No hydroboost for this truck, it'll throw you threw the windshield as is. When racing/autocrossing, you stab the brakes hard on and off quite a bit and hydroboost doesn't do well with that. Plus it's more lines/weight/potential for leaks and I'd really hate to lose brakes and steering all of a sudden when there's walls or poles close.

 

[Chevrolado]

Pulled it out in the driveway to pressure wash off all the cobwebs off from spring/summer storms.

You must be registered for see images attach

Then pulled it into the shop again to start picking away on some things again.