What do ya'll suppose my Nova is worth?

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

bucket

Super Moderator
Staff member
Super Moderator
Joined
Aug 3, 2010
Posts
29,127
Reaction score
24,036
Location
Usually not in Ohio
First Name
Andy
Truck Year
'77, '78, '79, '84, '88
Truck Model
K5 thru K30
Engine Size
350-454
I don't really want to sell any of my stuff, but I really should. My Nova is one of my more impractical cars, which is why it's first. Anywho, it's a '78 coupe with a low-mile 454/th400 under the hood. Body is pretty good, especially for an Ohio car, just needs some minor patching and the panels could stand to be aligned better. Interior is also pretty good, it's partially taken apart and I don't have carpet for it. Underbody and front suspension parts are all good. I have all the trim and lights for the car. It currently does not run/drive, it needs put together some to get it to that point. I have most parts to complete, but do not yet have a radiator, shortened d-shaft, electric cooling fan, or exhaust pipes. It's a very easy project to get going.

So what do you think the value might be? I realize this body style isn't very desirable, if it were a '68-'72 style it would be worth a lot more.

You must be registered for see images attach


You must be registered for see images attach


I don't have any current engine pics, but it is installed.
 

Driver4r

Full Access Member
Joined
Jun 21, 2012
Posts
3,087
Reaction score
40
Location
Nebraska
First Name
Trevor
Truck Year
76,74
Truck Model
k10,c20
Engine Size
355/th350/np203, 454/th350/ff-rear
Ill give you a dollar, and thats JUST cause its a Big block.
 

bucket

Super Moderator
Staff member
Super Moderator
Joined
Aug 3, 2010
Posts
29,127
Reaction score
24,036
Location
Usually not in Ohio
First Name
Andy
Truck Year
'77, '78, '79, '84, '88
Truck Model
K5 thru K30
Engine Size
350-454
Ill give you a dollar, and thats JUST cause its a Big block.

It's a lot closer to terrorizing the streets then your Monte :emotions33:
 

bigcountryguy19

Full Access Member
Joined
Apr 5, 2013
Posts
359
Reaction score
15
Location
Sealy texas
First Name
josh
Truck Year
1984
Truck Model
K20
Engine Size
6.2 diesel
I'd say maybe 2000. And I bet people would just buy it for the drive train and them scrap the car
 

Driver4r

Full Access Member
Joined
Jun 21, 2012
Posts
3,087
Reaction score
40
Location
Nebraska
First Name
Trevor
Truck Year
76,74
Truck Model
k10,c20
Engine Size
355/th350/np203, 454/th350/ff-rear
It's a lot closer to terrorizing the streets then your Monte :emotions33:

AHHHH, ya got me. Your just lucky im not putting the lq9 in, i might have just drove down and wooped your but in a race XD.

And when your 17 with no job, and still thinking about details, building things goes slow. Exspecially when chasing tail LOL(no wonder im broke.....).


ANNNNNNND, jokes on you, the 305 in the monte still starts and runs, it just has a rod knock.
 

bucket

Super Moderator
Staff member
Super Moderator
Joined
Aug 3, 2010
Posts
29,127
Reaction score
24,036
Location
Usually not in Ohio
First Name
Andy
Truck Year
'77, '78, '79, '84, '88
Truck Model
K5 thru K30
Engine Size
350-454
AHHHH, ya got me. Your just lucky im not putting the lq9 in, i might have just drove down and wooped your but in a race XD.

And when your 17 with no job, and still thinking about details, building things goes slow. Exspecially when chasing tail LOL(no wonder im broke.....).


ANNNNNNND, jokes on you, the 305 in the monte still starts and runs, it just has a rod knock.

I was there too at that age. Every penny I made went to gas, insurance, and my car. But nothing happened fast at minimum wage.
 

Driver4r

Full Access Member
Joined
Jun 21, 2012
Posts
3,087
Reaction score
40
Location
Nebraska
First Name
Trevor
Truck Year
76,74
Truck Model
k10,c20
Engine Size
355/th350/np203, 454/th350/ff-rear
I was there too at that age. Every penny I made went to gas, insurance, and my car. But nothing happened fast at minimum wage.

Sure glad i have a cavalier that gets 28/41mpg, Befor when my truck was my DD, Any money i had when in that tank...LOL it was like 20$ a day...

And my last gf, her school was 30miles 1 way, add that up atleast a few duzon times, with the 4.11's making her run around 3500rpm. When thrue quite a few gallons of gas.
 
Last edited:

Streettruck1

Junior Member
Joined
Nov 25, 2013
Posts
6
Reaction score
0
Location
Kentucky
First Name
Josh
Truck Year
1980
Truck Model
C10
Engine Size
350
I'd say 2500 be top dollar if u could just get it to start up for whoever looks at it u could ask 3000 and go down and get lil more room to deal without losing a lot money
 

WastedWages

Member
Joined
Oct 27, 2013
Posts
30
Reaction score
0
Location
Kansas
First Name
Benjamin
Truck Year
79
Truck Model
k10
Engine Size
350
it's worthless, just give it to me...seriously though, you should pull the drivetrain, sell it or use it on a different project. Then drop an old worn out wee 'o five and a th350 in it and i'm sure some high school kid will pay ya 1500 bucks for the thing with a coat of primer on it..
 

bucket

Super Moderator
Staff member
Super Moderator
Joined
Aug 3, 2010
Posts
29,127
Reaction score
24,036
Location
Usually not in Ohio
First Name
Andy
Truck Year
'77, '78, '79, '84, '88
Truck Model
K5 thru K30
Engine Size
350-454
http://www.racingjunk.com what do you think the drivetrain is worth? What rear is in it?

it's worthless, just give it to me...seriously though, you should pull the drivetrain, sell it or use it on a different project. Then drop an old worn out wee 'o five and a th350 in it and i'm sure some high school kid will pay ya 1500 bucks for the thing with a coat of primer on it..

The only reason it's not running yet is because I haven't had time at all to mess with it, which means I also don't currently have the time to part it out or swap in a different motor.

Besides that, I'd hate to take it apart. It has all the right parts to make a pretty decent car. Besides the 454/th400, there's a nice intake, new high flow fuel pump, new water pump, 105 amp alt, new long tube headers, new Eddy 750 carb, new HEI dizzy, new subframe connectors, a nice Quarter Stick shifter, and a posi unit for the 8.5 10 bolt that's under the car. And it's not very rusty at all. I was thinking put together and all one color it would easily be a $3500 car. Maybe close to 5K after some engine work and a few other things to make it really come alive.

It's disappointing to realize the car really doesn't have much value as-is, I guess this bodystyle gets even less love than I thought. If it were about 7 years older it would be a different story.
 

Boone83K10

Full Access Member
Joined
Feb 4, 2013
Posts
841
Reaction score
42
Location
Boone, NC
First Name
Benjamin
Truck Year
1983
Truck Model
K10
Engine Size
350
Its funny how this body style gets no love but the late 70s Malibu is starting to get some value. The engine trans rear plus parts would draw more $$ by themselves.
 

Old77

Administrator
Staff member
Admin
Joined
Aug 19, 2010
Posts
28,264
Reaction score
8,739
Location
Kansas City, Mo
First Name
Jacob
Truck Year
1977/1990/1991
Truck Model
C10 longbed/R1500 Burb/R3500 Dually
Engine Size
350/350/454
I bet just getting it one color would make a huge difference in the amount someone would give you for it. People are visual. Definitely looks like a solid car!!
 

Swims350

Full Access Member
Joined
Jul 30, 2010
Posts
4,351
Reaction score
812
Location
Logan WV
First Name
Chris
Truck Year
1983
Truck Model
K10
Engine Size
none
big blocks run huge dollas round here, like 2g's for a motor with miles or maybe doesn't even run, see em on CL all the time.

I think spray the car and maybe 4-5k for it.

as is I wouldn't take less then 3-3500 for it.

If I had to take less I'd pull the drivetrain myself, keep it and sell the rest for whatever you can get for it.
 

Forum statistics

Threads
42,178
Posts
910,777
Members
33,675
Latest member
johnalen76
Top