flyboy1100
Full Access Member
- Joined
- May 23, 2014
- Posts
- 1,024
- Reaction score
- 9
- Location
- UsA
- First Name
- me
- Truck Year
- 1986
- Truck Model
- k1500
- Engine Size
- 305, 700r4??, 3.42 gears
pulled cluster to reroute my cruise control vacuum hose, before pulling cluster everything worked ok. now everything still works fine when my lights are OFF, but when i turn my lights on:
1. Gas gauge drops to E
2. there is about 8v on the gas gauge ground
3. turn signal lights both turn on. if you signal left or right that seems to work, but both will still stay lit all the time.
I cleaned up all the grounds, not sure where else to look exactly. the 8v on the ground is baffling and I will admit i forgot to test other grounds on the cluster before posting this. i can do that tomorrow.
1. Gas gauge drops to E
2. there is about 8v on the gas gauge ground
3. turn signal lights both turn on. if you signal left or right that seems to work, but both will still stay lit all the time.
I cleaned up all the grounds, not sure where else to look exactly. the 8v on the ground is baffling and I will admit i forgot to test other grounds on the cluster before posting this. i can do that tomorrow.