mtnmankev
Full Access Member
- Joined
- Jun 10, 2014
- Posts
- 1,623
- Reaction score
- 3,297
- Location
- Ash Fork, Arizona
- First Name
- Kevin
- Truck Year
- 1984, 1983
- Truck Model
- K10, C20
- Engine Size
- 383 Stroker, 350
I need an affordable limited slip for my 10 bolt 8.5" 84 K10 Front 28 spline axle.
With good bearings and races is a plus, that would save me buying a kit and a hydraulic press..
And after all I have read about the gov lock, I am quite sure I don't want one of those.
My gearset is 14/40 if the numbers stamped on the ring gear are correct.
I could also make use of two front axle spindles with nuts and washers for the outer bearing in very nice shape, mine are rusted and pitted bad. I already have bearing and seal kits from NAPA for spindles.
Shipping would be to 86320.
Thanks,
Kevin
With good bearings and races is a plus, that would save me buying a kit and a hydraulic press..
And after all I have read about the gov lock, I am quite sure I don't want one of those.
My gearset is 14/40 if the numbers stamped on the ring gear are correct.
I could also make use of two front axle spindles with nuts and washers for the outer bearing in very nice shape, mine are rusted and pitted bad. I already have bearing and seal kits from NAPA for spindles.
Shipping would be to 86320.
Thanks,
Kevin
