mtnmankev
Latest activity Postings About
-
-
mtnmankev replied to the thread Rear diff weirdness.Yes, with the truck sitting level, fill until it just barely starts to run out the hole. And, as a general rule I was taught back in the... -
mtnmankev replied to the thread Rear diff weirdness.Look at the passenger side of the front part of the differential for a fill plug. A 3/8" square drive will fit it.
-
mtnmankev replied to the thread Do not buy a cheap generic Edelbrock rebuild kit.I was prepared to open a dispute regarding the carb kits I got, but contacted the seller to give him a chance to make things right. I...
-
mtnmankev replied to the thread Do not buy a cheap generic Edelbrock rebuild kit.I ordered a Walker kit today after finding out the cheap import knock off kit caused more damage than it fixed.
-
I made the mistake and found virtually everything in the kit was wrong somehow, the needle seats were a slightly different thread from...
-
mtnmankev replied to the thread Can you run Schaeffer 50W oil in a SM465?.I always thought that viscosity index ratings were based on the same criteria, different oils are different thickness and flow...
-
mtnmankev replied to the thread Front drive shaft.7/16" head size, or threaded shank size ? There's a slight difference.
-
mtnmankev replied to the thread Can you run Schaeffer 50W oil in a SM465?.In my opinion and experience, it seems the viscosity index MIGHT be okay if the climate was cold year round, otherwise probably too low...
-
mtnmankev replied to the thread Let's see those 4x4 Squares On Dirt!.That's where I do my shopping. You may have seen one or both of my trucks in the city. Almost every trip in, somebody recognizes me and...
-
-
mtnmankev replied to the thread Let's see those 4x4 Squares On Dirt!.I didn't save it, but there's a pic on another thread here showing my 4x4 square on the dirt (MUD) roads here in Ash Fork. Some folks...
-
-
Loading…
-
Loading…
