Thoughts on going to a 4spd overdrive?

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Bextreme04

Full Access Member
Joined
May 13, 2019
Posts
4,135
Reaction score
4,984
Location
Oregon
First Name
Eric
Truck Year
1980
Truck Model
K25
Engine Size
350-4bbl
That would surprise me. So where are they all now? You can still find 400s in every junk yard and farmers field. 700..s not so much.
They are in every single 1/2 ton pickup and van in the junkyard made after '87 and about half the ones made between 82-87. The rest have TH350's.... very occasionally you'll find a 4-spd manual. Around here I see probably 4:1 Manual 4-speeds to TH400 and you don't see many manuals.

I have NEVER seen a TH400 in any of the junkyards near me and rarely see them in any of the squares I see for sale either. Most of them have TH350 or 700R4's....
 

shiftpro

Full Access Member
Joined
Aug 31, 2012
Posts
4,855
Reaction score
6,085
Location
BC Canada
First Name
shiftpro
Truck Year
73-87
Truck Model
1500, 2500, 3500
Engine Size
350, 383, 454, 496!
They are in every single 1/2 ton pickup and van in the junkyard made after '87 and about half the ones made between 82-87. The rest have TH350's.... very occasionally you'll find a 4-spd manual. Around here I see probably 4:1 Manual 4-speeds to TH400 and you don't see many manuals.

I have NEVER seen a TH400 in any of the junkyards near me and rarely see them in any of the squares I see for sale either. Most of them have TH350 or 700R4's....

Yeah I get that, but I'm speaking from my experiences in my location. Here in BC it's hard to find old squares (especially the 70s) with any automatics. Go to Alberta and they were mad about 3/4 and 1 ton trucks... not so many 4x4s... and autos, which would be 400s. Further east to Saskatchewan there were many more 1/2 ton trucks with the 350.. up until the 80's when they were as you said, overdrives. Some places in the west the squares were scarce because there were pockets of Ford Country. No 350, 400, 700s to found out there! Regional microcosms of whatevers abound.
 

Matt69olds

Full Access Member
Joined
Jan 8, 2018
Posts
2,338
Reaction score
3,569
Location
Central Indiana
First Name
Matt
Truck Year
81
Truck Model
GMC 1/2 ton
Engine Size
455 Olds
Every model year 83ish and later 1/2 truck, van, most rear wheel drive passenger cars, Camaro, Firebird, corvette, S-10 trucks/vans, B bodies, literally millions of cars. The 400 WAS pretty plentiful, the chevy 400 are getting really hard to find. The BOP 400 (especially the long shaft models) are pretty easy to find around here.

I’d be willing to bet the overall 700/4L60e production is probably 3-4 times the 400 production.
 
Last edited:

Vbb199

B-rate Hillbilly Customs
Joined
Jan 12, 2018
Posts
8,871
Reaction score
14,885
Location
Salisbury NC
First Name
Vince
Truck Year
89, 79
Truck Model
89 Suburban R1500, 79 C10
Engine Size
350, 502
All i'll say here, is someone whos actually handled the internals of automatic transmissions, beaten on them and broken them because i can rebuild them, built them for a hotrod, friends, or offroad rigs , and tows with them in my square, and uses them daily in my square, and travels with them in my square (hours at a time), the 700r4 is the most no nonsense automatic to install in your truck for an all around use.
The nice low first of the 700r4 beats both the th400 and the 4L80e, and the only way to compensate for that lack of a low first gear is to have a low axle ratio, which ultimately affects your final drive (OD). Theres no two ways about it.
As said, if it was such a failure, why was millions of them made, and why are they still being built, sold, and ran, today?

The only thing a th400 is good for is for 2 things that most here dont even have, a bigass 4x4, or a hotass big block/diesel powered truck (or car)

If you fancy advanced electronics, and dont care about oem status in your squarebody, by all means, go a step up and install a 4L80e. But this level of general misinformation is wild.
 
Last edited:

Vbb199

B-rate Hillbilly Customs
Joined
Jan 12, 2018
Posts
8,871
Reaction score
14,885
Location
Salisbury NC
First Name
Vince
Truck Year
89, 79
Truck Model
89 Suburban R1500, 79 C10
Engine Size
350, 502
They are in every single 1/2 ton pickup and van in the junkyard made after '87 and about half the ones made between 82-87. The rest have TH350's.... very occasionally you'll find a 4-spd manual. Around here I see probably 4:1 Manual 4-speeds to TH400 and you don't see many manuals.

I have NEVER seen a TH400 in any of the junkyards near me and rarely see them in any of the squares I see for sale either. Most of them have TH350 or 700R4's....


Sadly, th350s and th400 arent vanishing, if i find a good core, i buy it, sight unseen. The gamble of spending 1-200$ for a core thats potentially a rust bucket inside, and getting just *1* servicable OEM part from it was well worth the money.

Scrap the rest, save the case.
Ive got a nice little collection of automatic parts boxed and labeled away so i have them right on hand should i need them
 

SquareRoot

Full Access Member
Joined
Mar 18, 2017
Posts
3,659
Reaction score
6,599
Location
Arizona
First Name
Mike
Truck Year
85
Truck Model
K20
Engine Size
350
I’m curious why you are so insistent 700/4L60E are junk? While you will get no argument from me they are definitely not the most durable trans, in the right application my experience has been pretty positive.
I'm with Rusty. 700's are junk.
Junk, junk, junk, junk,junk, junk. Get it? JUNK! Carry on.
 

John Nes

Full Access Member
Joined
Aug 21, 2019
Posts
852
Reaction score
1,128
Location
Atlanta
First Name
John
Truck Year
1987, 1979, 1973
Truck Model
R10, Sierra, C20
Engine Size
5.7 350tbi , 5.7 350, 5.7 350
Sadly, th350s and th400 arent vanishing, if i find a good core, i buy it, sight unseen. The gamble of spending 1-200$ for a core thats potentially a rust bucket inside, and getting just *1* servicable OEM part from it was well worth the money.

Scrap the rest, save the case.
Ive got a nice little collection of automatic parts boxed and labeled away so i have them right on hand should i need them
I picked up a known working th400 that had been sitting at the shop for a while for 200$ Just cuz.

Also after i first picked up my 87, I had the 700r4 rebuilt and the only issue I’ve had with it was the ratio output adapter didn’t have a great seal. Other than that I got no problems burying the needles and doin +90 combined with the 3.08 rear
 

SquareRoot

Full Access Member
Joined
Mar 18, 2017
Posts
3,659
Reaction score
6,599
Location
Arizona
First Name
Mike
Truck Year
85
Truck Model
K20
Engine Size
350
See?Junk.

Reader,
How long did GM make turbo 400s?
Compared to how long did they make 700s?
Which was used in more vehicles?
You must be registered for see images attach

Which do ya figure moves more vehicles - today?

Bros. Your knickers are in a ball - maybe you should have a Snickers first huh?
Yup. Knicker Twist. Wife gets it almost daily. And btw, 700's are junk!
 

SquareRoot

Full Access Member
Joined
Mar 18, 2017
Posts
3,659
Reaction score
6,599
Location
Arizona
First Name
Mike
Truck Year
85
Truck Model
K20
Engine Size
350
That's a great point..ya know I bet you could build two or three turbo 400s for the cost of one of them p_ssy overdrives.

Let's get real (who am I kidding) how many gears do you think is necessary for the next run to macdonalds anyway? Savin gas are ya? Gonna save the planet better with your 4 inch lift and 35s or do ya think its best to stick with 2 inches and 32s?
Big block or bust.
Overdrive.
Gas mileage.
VORTEX HEDS BABY!
You must be registered for see images attach
fix.everything.
Vortec Rusty, vortec!
 

SquareRoot

Full Access Member
Joined
Mar 18, 2017
Posts
3,659
Reaction score
6,599
Location
Arizona
First Name
Mike
Truck Year
85
Truck Model
K20
Engine Size
350
All i'll say here, is someone whos actually handled the internals of automatic transmissions, beaten on them and broken them because i can rebuild them, built them for a hotrod, friends, or offroad rigs , and tows with them in my square, and uses them daily in my square, and travels with them in my square (hours at a time), the 700r4 is the most no nonsense automatic to install in your truck for an all around use.
The nice low first of the 700r4 beats both the th400 and the 4L80e, and the only way to compensate for that lack of a low first gear is to have a low axle ratio, which ultimately affects your final drive (OD). Theres no two ways about it.
As said, if it was such a failure, why was millions of them made, and why are they still being built, sold, and ran, today?

The only thing a th400 is good for is for 2 things that most here dont even have, a bigass 4x4, or a hotass big block/diesel powered truck (or car)

If you fancy advanced electronics, and dont care about oem status in your squarebody, by all means, go a step up and install a 4L80e. But this level of general misinformation is wild.
700=Junk. In fact I don't know why I'm on the 700is junk bandwagon when what I really feel deep down inside is ALL automatic slushboxes are junk.
4 speed and proper gears or big boy pants and NV4500. Allison. That might tickle my fancy if auto was my only choice. Now, about that Hagertys 502 vbb?
 

Vbb199

B-rate Hillbilly Customs
Joined
Jan 12, 2018
Posts
8,871
Reaction score
14,885
Location
Salisbury NC
First Name
Vince
Truck Year
89, 79
Truck Model
89 Suburban R1500, 79 C10
Engine Size
350, 502
700=Junk. In fact I don't know why I'm on the 700is junk bandwagon when what I really feel deep down inside is ALL automatic slushboxes are junk.
4 speed and proper gears or big boy pants and NV4500. Allison. That might tickle my fancy if auto was my only choice. Now, about that Hagertys 502 vbb?

Burning tires
Its getting old lol
Until i have fatties, its not gonna quit
 

Green79Scottsdale

Full Access Member
Joined
Aug 8, 2010
Posts
2,834
Reaction score
7,483
Location
G.R. - MI
First Name
Bob
Truck Year
1979
Truck Model
K20
Engine Size
400
I'm with Rusty. 700's are junk.
Junk, junk, junk, junk,junk, junk. Get it? JUNK! Carry on.

I am not necessarily arguing, but I can't take you serious if you don't give reasons. Just standing there proclaiming something without solid reasoning doesn't make people think critically.
 

SquareRoot

Full Access Member
Joined
Mar 18, 2017
Posts
3,659
Reaction score
6,599
Location
Arizona
First Name
Mike
Truck Year
85
Truck Model
K20
Engine Size
350
I am not necessarily arguing, but I can't take you serious if you don't give reasons. Just standing there proclaiming something without solid reasoning doesn't make people think critically.
I'm just making noise. I like to get rusty and vbb riled up. I'm done now. Carry on.
 

Latest posts

Forum statistics

Threads
41,854
Posts
903,563
Members
33,367
Latest member
texdave
Top