Stuck ball joint

[jh86]

Can’t get the ball joint out. Advice?

You must be registered for see images attach

 

[Ricko1966]

Pound the ball joint studs through the back of the ball joint. Now you'll have a hollow ball joint make a relief cut or 2 in the hollow body.

 

[PrairieDrifter]

Heat.

 

[CalSgt]

What @Ricko1966 and @PrairieDrifter said

I’ll add you should definitely grease the threads on that ball joint press

 

[Vbb199]

Take a ball peen and firmly, but one or two single times smack the side of the casting where the taper goes in. Like the side of the casting. The hammer strike might break the taper lock

 

[xm20k]

Watch from the 5 minute mark. Tool is wrong (yours looks to be setup to press in) and the other one has to come out first.

xc_hide_links_from_guests_guests_error_hide_media

 

[idahovette]

.

 

[xm20k]

.

You alright, you lost, you forget why came in here. I know you're getting old but GD

 

[idahovette]

@xm20k OK you are fukin hilarious A$$HOLE....so I made a mistake.......lost my train...........don't pick on old sick guys that just got out of the hospital..................lol

 

[CalSgt]

@xm20k OK you are fukin hilarious A$$HOLE....so I made a mistake.......lost my train...........don't pick on old sick guys that just got out of the hospital..................lol

I think you could use a cold one...

& because its March no Coors cans will be shared.

You must be registered for see images attach

 

[Sad Sack]

Whoa, wait a sec! Who's picking up old sick guys? Now that's just weird...

 

[idahovette]

@Sad Sack you can't read.............on NOT up........don't make this any worse than it already is

 

[xm20k]

You must be registered for see images attach

 

[Sad Sack]

@Sad Sack you can't read.............on NOT up........don't make this any worse than it already is

I claim the 5th.

 

[idahovette]

You DRANK the fifth!!!!