LS Swap Fuel Lines

[Madhorn]

I have been researching different types and manufactures of fuel injection fuel line as well as connectors/hose ends. With the LS swap I am doing I need feed and return lines. Of course the Russell stuff is great, but expensive (~$325). The Dorman nylon fuel line and connectors are the cheapest (~$110). Right now I am considering using Gates Barricade MPI hose and Dorman barbed connectors/hose ends (~$155). Any subjections or insight into fuel line options?

 

[throttle out]

http://www.redhorseperformance.com/
I did my fuel lines for my ls swap for $125
All -6an fittings and stainless braided lines, feed and return.

 

[Camar068]

I use this stuff for all my brake, fuel and tranny cooling lines, easiest stuff to work with, flares real easy and you can bend it by hand, great for minor tweaking when you don't get the bends dead nuts..

http://agscompany.com/product-category/brake-fuel-transmission-lines/poly-armour/

I decided to go hard line. However I checked their website and they wanted $45, $10 higher than what it was a while back. So I googled PAC-625 (25' of 3/8" line) and autozone had it for $28. Military discount helped a bit also.

 

[74 Shortbed]

I decided to go hard line. However I checked their website and they wanted $45, $10 higher than what it was a while back. So I googled PAC-625 (25' of 3/8" line) and autozone had it for $28. Military discount helped a bit also.

Yeah, I'd never buy off their site, anymore just about every parts store sells the stuff, I usually get mine from the Zone too they usually have the best price, I did find a couple good deals on E-Gay though.